The Universal Selection Source: Plastics & Elastomers

by SpecialChem

Cellidor® B 500-13

Technical DataSheet | Supplied by Albis

Cellulose acetate butyrate. Has 13 % phthalate-free plasticizer and low odor. It is an organic, thermoplastic cellulose ester which consists of approximately 45% cellulose, a renewable natural material. This means that, unlike traditional plastics, it is only partially dependent on finite fossil fuel resources. Offers pleasantly warm and soft surface, a self-polishing effect as well as an almost unlimited range of possible colors. Possesses high tensile strength and excellent light transmission. Used in various applications.

Cellidor® B 500-13 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Product Status
xxxxxxxxxx
Geographical Availability
xxxxxxxxxxxxxxxxxxxxxxxxx
Applications/ Recommended for
Injection molding - thermoplastics
Bio Based
xxx
Bio Based Content (%)
xx
Key Features
  • xxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxx
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxx

Cellidor® B 500-13 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Specific Gravity (Density)
1.180 g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR)
12 cm³/10 min
( 210/2.16 )
ISO 1133

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Modulus
xxxx MPa
xxxxxxx
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxx
xxxxxxx
Tensile Strain
xxx %
xxxxxxxx
xxxxxxx
Tensile Strength (Tensile Stress)
xx MPa
xxxxxxxx
xxxxxxx
Tensile Strain
xx %
xxxxxxxx
xxxxxxx
Flexural Stress
xx MPa
xxxx
xxxxxxx
Flexural Modulus
xxxx MPa
xxxxxx
Flexural Strength
xx MPa
xxxxxxx

Impact Properties

Value & Unit
Test Condition
Test Method
Charpy Notched Impact Strength
xx kJ/m²
xxxxxxxxxx
Charpy Notched Impact Strength
xx kJ/m²
xxxxx
xxxxxxxxxx
Charpy Notched Impact Strength
x kJ/m²
xxxxx
xxxxxxxxxx
Charpy Unnotched Impact Strength
xxxxxxxxxx kJ/m²
xxxxxxxxxx

Hardness Properties

Value & Unit
Test Condition
Test Method
Ball Indentation Hardness
xx MPa
xxxxxxx
xxxxxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Vicat Softening Temperature
xx °C
xxx
xxxxxxx
Heat Deflection Temperature Under Load (HDT)
xx °C
xxxxxxxxxx
xxxxxxxx

Flammability Properties

Value & Unit
Test Condition
Test Method
Flame rating (UL 94)
xxxxxx
xxxxxxxxx
Flame rating (UL 94)
xxxxxx
xxxxxxxxx

Cellidor® B 500-13 Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Drying Temperature
xxxxxxx °C
Drying Time
xxxxx hr
Suggested Max Moisture
xxxxxx %
Processing (Melt) Temp
xxxxxxxxx °C
Mold Temperature
xxxxxxx °C
Last edited Dec 29, 2016
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top