The new engineering materials powerhouse

by SpecialChem

Ingeo® Biopolymer 6302D

Technical Datasheet | Supplied by NatureWorks

Ingeo® Biopolymer 6302D by NatureWorks is a polylactic acid (PLA). It is an amorphous thermoplastic fiber-grade resin derived primarily from annually renewable resources. It is designed for extrusion into mechanically drawn staple fibers using conventional fiber spinning and drawing equipment. Ingeo® Biopolymer 6302D can be used as a low melt binder polymer in a sheath-core configuration. Used in thermal bonded nonwovens.

Ingeo® Biopolymer 6302D Properties

Physical Properties

Value & Unit

Test Condition

Test Method

Melt Density

1.08

(At 230°C)

Relative Viscosity

3.0

CD Internal Viscotek Method

Hot Air Shrinkage

2 %

(At 85°C, 15 min)

Extrusion Properties

Value & Unit

Test Condition

Test Method

Suggested Max Moisture

< 0.005 %

Air Flow Rate

> 0.5 cfm/lbs/hr

Drying Temperature

40 - 50 °C

*The last time this product was checked, its availability could not be confirmed. If you have more information about its availability, please contact us.

Want to list or
update your products?

View the listing options

Want to report errors or
suggest improvements?

Send a Feedback

Products with the same brand name

Ingeo® Biopolymer 6204D

View more (1)

Ingeo® Biopolymer 6302D

Ingeo® Biopolymer 6302D Properties

Physical Properties

Ingeo® Biopolymer 6302D Processing Guidelines

Extrusion Properties