R21-2615 by Avantor is a flowable, optically clear, high durometer fluoro silicone rubbers (FMQ) grade. It consists of two parts (A:B in 1:1) ratio. R21-2615 can be used for potting and... view more

Stelora™ by Borealis is a sustainable, cost-effective ethylene propylene norbornene (EPN) rubber. It is produced from renewable feedstock.

It exhibits excellent... view more
Applications
• Electronics / Computers>Electronic components (capacitors...)
Features
• Cost Effective
• Durable
• Electrical Properties Good
• Energy Saving
...

SILCOSET 101 by CHT Group is a two-part, pourable, resilient, high temperature resistant silicone rubber. It remains flexible over the temperature range -60 to 250°C, with short periods up to 300°C... view more

BDF402P by Chenguang Fluoro & Silicone Elastomers is a white colored, medium viscosity, curative incorporated, fluorinated hydrocarbon rubber (FKM) copolymer. Offers good rheological properties and... view more

Ricobond® 1731 by Cray Valley (Total Group) is a low molecular weight polybutadiene rubber grade, functionalized with maleic anhydride. Provides toughness to epoxy systems. Ricobond® 1731 is used in... view more

Ricon® 100 by Cray Valley (Total Group) is a low molecular weight, scorch retarding styrene butadiene copolymer grade. Offers electrical insulation and high tear strength. Ricon® 100 is used in... view more

Ricon® 130 by Cray Valley (Total Group) is a low molecular weight, plasticizing polybutadiene homopolymer grade, containing 3,6 di-tertiary-butyl-4-methylphenol as an antioxidant. Exhibits... view more

Ricon® 130MA13 by Cray Valley (Total Group) is a low molecular weight polybutadiene rubber grade, functionalized with maleic anhydride. Offers toughness for epoxy systems. Ricon® 130MA13 is used in... view more

Ricon® 130MA20 by Cray Valley (Total Group) is a low molecular weight polybutadiene rubber grade, functionalized with maleic anhydride. Offers toughness for epoxy systems. Ricon® 130MA20 is used in... view more

SILASTIC™ RBL-9200-70 Liquid Silicone Rubber by Dow is 1 to 1 mix, general purpose, liquid silicone rubber (LSR). It offers excellent process performance enables short cycle times, unique rheology, improved flowability and... view more

SYLGARD™ 3-6605 by Dow is a solvent-free, two part (1:1), silicone adhesive, thermally conductive elastomer with good working time. Exhibits good flowability, versatile heat cure, long working time... view more

XIAMETER™ RBL-2004-60 Liquid Silicone Rubber by Dow is 1 to 1 mix, liquid silicone rubber (LSR). It exhibits excellent balance between pot life and short cycle time associated with superior mechanical properties and... view more

BLUESIL™ ESA 6000 HT A/B by Elkem Silicones is a pourable, two component silicone rubber. It cures at room temperature by a polyaddition reaction, to a very soft silicone gel. It offers very high... view more