OK
Industry News

K 2019: ENGEL to Present Tube Shoulder Production via e-mac Injection Molding

Published on 2019-09-06. Author : SpecialChem

TAGS:  K 2019      Machinery      Part Design & Manufacturing    

ENGEL Packaging Tube ShoulderAt K 2019, ENGEL will take its ENGEL e-mac 280 to the packaging floor, allowing for an even more granular performance gradation for the packaging industry in all-electric use cases.

Tube collars made of HDPE (Borealis/Borouge) with a total shot weight of 81.6 grams are being produced on an all-electric e-mac 740/280 injection molding machine, using a 48-cavity mold by Sibo. The cycle time is eight seconds, and therefore precisely in the range in which the e-mac plays out its efficiency benefits to the max.

Friedrich Mairhofer, Product Manager Electrical Machines at ENGEL said: “The e-mac combines very high energy efficiency and precision with a particularly compact design and comparatively low investment costs,”

Compact Machines for Higher Productivity Per Unit Area


Using an optimized toggle-lever design, the clamping unit of the e-mac 280 is particularly shorter without reducing the opening stroke. “This makes it possible to leverage shop floor space to the max and increase productivity per unit of area,” says Mairhofer. As a result, the e-mac 280, with its clamping force of 2800 kN, is often found in applications with large multi-cavity molds.

The ENGEL e-mac machines are exclusively equipped with particularly powerful servomotors, including the ejector and nozzle movement. This not only ensures maximum precision and process stability, but also an optimum overall efficiency level.

“With its performance features, the e-mac is the most cost-effective solution for many packaging applications with a cycle time of more than six seconds,” says Mairhofer. All told, the series covers a wide spectrum of applications. Featuring clamping forces of 500, 750, 1000, 1800 and 2800 kN, the e mac machines have become very well established in the teletronics and technical molding industries.
ENGEL e-mac Machinery
All-electric e-mac Injection Molding Machines for High Precision and Compact Design

Two Series for Even Shorter Cycle Times


In the high-speed, all-electric high-performance range, with cycle times of less than six seconds, ENGEL's e-motion series and e-cap machines, which are tailored to caps and closures applications, meet a wide range of market requirements with the highest precision and cost-effectiveness. Together, the two series cover a clamping force range from 300 to 6500 kN and achieve cycle times of less than two seconds.

Both the e-motion and e-cap machines are equipped with encapsulated toggle levers and a very clean linear platen guide; this makes them ideal for strictly regulated production areas and cleanrooms in the foods and medical technology industries.


Source: ENGEL
Channel Alerts

Receive weekly digests on hot topics

Back to Top