OK
Industry News

New Way to Make Fully Recyclable Carbon Fiber Composites Using Bio-based Epoxies

Published on 2022-02-10. Edited By : SpecialChem

TAGS:  Sustainability and Bioplastics    Automotive     New Energy Solutions   

bio-based-epoxyNREL researchers have shown that making carbon fiber composites with bio-based epoxies and an anhydride hardener makes the material fully recyclable by introducing linkages that are more easily degraded.

In fact, the recycling process—called methanolysis—can be selectively triggered at room temperature without degrading the quality or orientation of the fibers. That could represent a strong step toward a circular material, which can make carbon fiber cheaper and greener when used across multiple lives.

Epoxy Designed for Recyclability


NREL scientist Nicholas Rorrer and his teammates began experimenting with the chemistry of biomass to understand if it could enable a new epoxy designed for recyclability. Compared to the hydrocarbons in petroleum, biomass contains higher levels of oxygen and nitrogen, offering a different set of chemical possibilities.

"We essentially redesigned the epoxy amines resins—today's thermosets in carbon fiber—with epoxy and anhydrides synthesized from biomass, predominantly from the biological and chemical conversion of sugars," Rorrer explained. "We have shown that that reformulated resin can maintain and/or exceed all the same properties as in today's epoxy amine resins, but also make them recyclable by design—and at room temperature."

Recovering Carbon Filaments


Using a special catalyst, the NREL team was able to break down the bio-based resin at room temperature, a process known as "depolymerization." That allowed them to recover the carbon filaments while maintaining their quality and alignment.

"We can actually maintain the fiber quality over at least three material lives," Rorrer said. "So not only are we able to recycle it; we are able to recycle it without any detriment to properties. We are not downcycling the material at all."

Combined with NREL's research into low-cost, bio-based acrylonitrile as a carbon fiber precursor - which earned an R&D 100 award in 2018—the breakthrough in epoxy could go a long way in making carbon fiber composites more cost effective and environmentally friendly.

Economical Material for Mass Market EVs


Being able to extract and recycle the carbon fiber could make the material more economical for mass market electric vehicles, freeing up weight and space for batteries. It would also lower the material's GHG footprint by 20%–40%. Better yet, it could achieve all that without increasing manufacturing costs, as Rorrer estimates NREL's epoxy could be produced for roughly the same price as today's petroleum-based epoxy-amine resins.

"By using bio-based feedstocks instead of petrochemical feedstocks, we don't have to use extra energy to dramatically retool their chemistries," Rorrer added. "That allows us to more precisely, cheaply, and effectively design advanced materials with performance and environmental advantages."

Source: NREL

subscribe-SB-channelsusbscribe-to-automotive-CHA new-energy-channel-subscription


Channel Alerts

Receive weekly digests on hot topics

Back to Top