The Universal Selection Source: Plastics & Elastomers

by SpecialChem

Pebax® Rnew® 55R53 SP 01

Technical DataSheet | Supplied by Arkema

Pebax® Rnew® 55R53 SP 01 by Arkema is a bio-based thermoplastic acrylic (TPA) grade, made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat- and UV resistant. It is composed of block copolymers consisting of a sequence of polyamide 11 and polyether segments. Offers significant flexibility in a wide range of applications. It is a heat- , light- and UV stabilized grade, exhibiting high chemical resistance and low density. Designed for thermoforming, casting, transfer- and injection molding, film- and profile extrusion processing methods. Pebax® Rnew® 55R53 SP 01 can be reinforced with various fillers, used as an additive or in blends with other polymers or rubbers. It is delivered dried in sealed packaging ready to be processed. Drying is only necessary for bags opened for more than 2 hours. This grade contains 62-66% of renewable resources. Suitable for moisturized conditions.

Pebax® Rnew® 55R53 SP 01 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Physical Form
Pellets
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • Extrusion > Profiles
  • Injection molding - thermoplastics
  • xxxxxxxxxxxxxxxxxxxxxxxxx
Bio Based
xxx
Bio Based Content (%)
xxxxx
Filled with Bio Fillers
xx
Key Features
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxx

Pebax® Rnew® 55R53 SP 01 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Molding Shrinkage
1 %
( Parallel )
ISO 294-4 2577
Molding Shrinkage
1 %
( Normal )
ISO 294-4 2577
Water Absorption
xxx %
xxxxxxxxxx
Humidity Absorption
xxx %
xxxxxxxxxx
Specific Gravity (Density)
xxxx kg/m3
xxxxxxxx
Specific Gravity (Density)
xxxx kg/m3
xxxxx
xxxxxxxx

Mechanical Properties

Value & Unit
Test Condition
Test Method
Tensile Modulus
xxx MPa
xxxxx
xxxxxxxxxx
Tensile Strength (Tensile Stress)
xxxx MPa
xxxxxxxxxx
xxxxxxxxxx
Tensile Strain
xxx %
xxxxxxxxxx
xxxxxxxxxx
Charpy Impact Strength
x kJ/m2
xxxxx
xxxxxxxxxx
Charpy Impact Strength
x kJ/m2
xxxxxxxxxx
xxxxxxxxxx
Charpy Impact Strength
x kJ/m2
xxxxx
xxxxxxxxxx
Charpy Impact Strength
x kJ/m2
xxxxxxxxxx
xxxxxxxxxx
Charpy Notched Impact Strength
x kJ/m2
xxxxx
xxxxxxxxxx
Charpy Notched Impact Strength
x kJ/m2
xxxxxxxxxx
xxxxxxxxxx
Charpy Notched Impact Strength
x kJ/m2
xxxxx
xxxxxxxxxx
Charpy Notched Impact Strength
x kJ/m2
xxxxxxxxxx
xxxxxxxxxx
Durometer Hardness (Shore)
xx -
xxxxxxxxxx
xxxxxxx

Thermal Properties

Value & Unit
Test Condition
Test Method
Melting Temperature (Melting Point)
xxx °C
xxxxxxxx
xxxxxxxxxx
Vicat Softening Temperature
xxx °C
xxxxxxxxxx
xxxxxxx

Pebax® Rnew® 55R53 SP 01 Processing Guidelines

Injection Properties

Value & Unit
Test Condition
Test Method
Melt Temperature
xxx °C
Mold Temperature
xx °C
Last edited Jun 8, 2017
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Back to Top