OK
The Universal Selection Source:
Plastics & Elastomers

Medalist® MD-34950

Technical DataSheet | Supplied by Teknor Apex

Medalist® MD-34950 by Teknor Apex is a thermoplastic elastomer (TPE) grade. Offers good processability, shorter molding cycle, improved compression set and consistent piston release & travel force due to low coefficient of friction. It is recyclable, bio-compatible and sterilized through gamma radiation & ethylene oxide. It can be over-molded onto engineering resin like PC, ABS, PC/ABS, COPE, PMMA, PBT and POM. It is free from DEHP, phthalates, BPA, latex & ADM and does not require pre-drying. Medalist® MD-34950 is used in plunger stoppers to enhance syringe function. Meets ISO 13485, ISO 10993-5, REACH and SVHC compliance.

Medalist® MD-34950 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Appearance
Black, Natural
Product Launch Date
xxxxxxxxxxx
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • Healthcare / Medical > Syringes
  • Injection molding - thermoplastics
Labels/Agency Rating
xxxxxxxxxxxxxxxxxxxxxxxxx
Key Features
  • xxxxxxxxxxxxx
  • xxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxx
  • xxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxx

Medalist® MD-34950 Properties

Physical Properties

Value & Unit
Test Condition
Test Method
Specific Gravity
0.94
ASTM D792
Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index)
3 g/10 min
( At 200°C/5.0 kg )
ASTM D1238

Mechanical Properties

Value & Unit
Test Condition
Test Method
Hardness, Shore A
xx -
xxxxxxxxxx
xxxxxxxxxx
100% Modulus
xxxx MPa
xxxxxxxxx
Tensile Strength
xxxx MPa
xxxxxxxxx
Elongation
xxx %
xxxxxxxxx
Tear Strength
xxxxx N/mm
xxxxxxxxxx
xxxxxxxxx
Compression Set
xx %
xxxxxxxxxx
xxxxxxxxx
Compression Set
xx %
xxxxxxxxxx
xxxxxxxxx
Last edited May 10, 2018
Back to Top