ALM PA 415-GS is a nylon (PA (polyamide) 12) grade filled with 40% glass spheres. Exhibits good mechanical properties and surface finish. Stabilized against thermal degradation. Shows reduction in... view more

ALM PA 605-A is a nylon (PA (polyamide) 12) grade filled with 50% aluminum. Exhibits good machinability, improved heat transfer, good dimensional stability and pleasant gray metallic part... view more

ALM PA 616-GS is a white colored, water insoluble, P-machine optimized nylon (PA (polyamide) 12) grade filled with 50% glass spheres. Exhibits improved dimensional stability and increased stiffness... view more

Ultrasint® PA6 MF by BASF 3D Printing Solutions is a mechanically reinforced, polyamide 6 for exceptionally strong parts with in-particle filler technology. Used in engine bay parts, media flow and... view more

WINDFORM® GF 2.0 is a water-insoluble powder of a composite material based on polyamide filled with glass and aluminum. It exhibits improved thermal properties, mechanical properties, heat... view more

ELIX ABS-3D NF by ELIX Polymers is a natural or precolored acrylonitrile butadiene styrene (ABS) grade reinforced with natural fibers. Exhibits improved printing performance, low warpage... view more

ELIX ECO ABS-NF is an eco-friendly ABS (acrylonitrile butadiene styrene) polymer composite material reinforced with natural fiber. Exhibits high stiffness, heat resistance, low molding shrinkage... view more

Alumide by EOS is a metallic grey colored polyamide 12 (PA 12, Nylon 12) grade reinforced with aluminium and is available in powdered form. Exhibits high stiffness, good density and metallic... view more

PA 2202 Black is a heat stabilized, pigment-filled polyamide 12 (PA 12) grade. Exhibits high mechanical or thermal loads, scratch resistance, and less susceptibility to soiling. Is suitable for... view more

PA 3200 GF is a polyamide 12 (PA 12) grade reinforced with glass. Exhibits low coefficient of friction, high stiffness, good elongation at break, high mechanical wear resistance, good thermal... view more

AquaSys® 180 by Infinite Material Solutions is a high temperature, water dispersible, thermoplastic material. This water soluble copolymer is filled with carbohydrate and polyamide (0-100%). It is... view more

Caverna™ PP by Infinite Material Solutions is a polypropylene copolymer resin filled with 0-100% carbohydrate. It has a water-soluble phase that dissolves to create a co-continuous, microporous... view more

Onyx by Markforged is a nylon (polyamide) grade reinforced with micro carbon. Exhibits stunning matte black finish, excellent rigidity, dimensional stability and environmental resistance. Suitable... view more

PA Alu-filled is a metallic-looking polyamide (PA) filled with aluminium powders. Exhibits stiffness, high temperatures resistance and allows non-porous components to be machined easily. Is suitable... view more

Windform® XT2.0 is a polyamide (PA) filled with carbon. This grade by Materialise is suitable for processing by laser sintering... view more

Pellet NEO TPU by Medphen is a graphene nanofiber reinforced thermoplastic polyurethane. It is a low-temperature flexible, very soft, and impact-resisting material. It improves the quality and the... view more

Pellet TPU Antimicrobial/GO-Ag by Medphen is thermoplastic polyurethane reinforced with silver particles on graphene oxide. It is a low-temperature flexible, very soft, and impact-resisting... view more

OXPEKK®-IG205BS by Oxford Performance Materials is a crystalline, biocompatible, chemically inert & non-absorbable polyetherketoneketone (PEKK) high performance grade reinforced with 5 % barium... view more

OXPEKK®-IG220BS by Oxford Performance Materials is a crystalline, biocompatible, chemically inert & non-absorbable polyetherketoneketone (PEKK) high performance grade reinforced with 20 % barium... view more

HiFill® ABS 0167 is a high density acrylonitrile butadiene styrene (ABS) grade reinforced with a filler. Can be processed using injection molding. Suitable for the growing 3D-printing market and... view more