Apec® RW1697 by Covestro is an easy-flowing, easy release, amorphous polycarbonate (PC) grade. It is an UV stabilized grade and exhibits high heat resistance, high toughness, high transparency and... view more

Bayblend® T65 HI by Covestro is a blend of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS). It is suitable for processing by extrusion blow molding and electroplating applications. It offers... view more

Texin® 570D by Covestro is a blend of polyester-based thermoplastic polyurethane (TPU) and polycarbonate (PC). It is an aromatic grade which is suitable for processing by injection molding... view more

Akulon® Fuel Lock FL-LP by Envalior is a high-performance, resilient polyamide 6 (PA 6) grade. It is a UV-stabilized grade and offers low fuel permeation benefits. It can be processed by blow molding. Exhibits... view more

Akulon® Fuel Lock FL40-HPX1 NA99001 by Envalior is a low fuel permeation polyamide 6 (PA 6) grade. Suitable for processing by extrusion blow molding. Recommended for automotive power product fuel tanks, electronics... view more

Akulon® Fuel Lock FL40-HPX2 NA99001 by Envalior is a heat & UV stabilized, cost-effective, polyamide 6 (PA6) grade with low fuel permeation. It is suitable for continuous extrusion blow molding or intermittent processes... view more

Akulon® Fuel Lock FLE40-HP by Envalior is a low fuel permeation polyamide 6 grade. Offers good chemical resistance and is suitable for processing by extrusion blow molding. Akulon® Fuel Lock FLE40-HP is used in automotive engine &... view more

Akulon® K240-HP by Envalior is a heat-stabilized, impact-modified polyamide 6 grade. It is suitable for processing by extrusion blow molding. Offers good chemical resistance. Akulon® K240-HP is used in... view more

LEXAN™ VISUALFX™ Resin FXD153 (Americas) by SABIC is a PFAS-free, unreinforced polycarbonate (PC) grade for diffusion effect. It shows aesthetics and visual effects. It is processed by extrusion blow molding and injection... view more

LEXAN™ VISUALFX™ Resin FXD153 (Europe) by SABIC is a PFAS-free, unreinforced polycarbonate (PC) grade for diffusion effect. It offers aesthetics and visual effects. It is suitable for processing by extrusion blow molding... view more

NORYL GTX™ Resin 626 (Americas) by SABIC is a heat stabilized, impact modified alloy of polyphenylene ether (PPE) and polyamide (PA). It is a blow moldable and extrudable grade. It exhibits high... view more

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness... view more