Edgetek™ 5209 Black 30 A 1 by Avient (Formerly PolyOne) is a general purpose, acetal (POM) copolymer. It is processed by injection molding. It offers low friction and wear resistance. It is recommended for automotive-, consumer- &... view more

Edgetek™ 5209 Natural 1 by PolyOne is a general purpose acetal (POM) copolymer. It can be processed by injection molding. It offers low friction and wear resistance. It is recommended for... view more

Edgetek™ AS-10GF/000 Black by Avient (Formerly PolyOne) is a general purpose, amorphous acrylonitrile butadiene styrene. It can be processed by injection molding. It offers good moldability & good toughness. It is reinforced with... view more

Edgetek™ NN-20CF/000 Black by Avient (Formerly PolyOne) is a general purpose, 20% carbon fiber reinforced polyamide 66 (PA 66) grade. It is processed by injection molding. Edgetek™ NN-20CF/000 Black is recommended for consumer-, automotive- and... view more

Edgetek™ PK-30CF/000 FCR BK by Avient (Formerly PolyOne) is a general purpose, 30% carbon reinforced polyether ether ketone (PEEK) grade. It exhibits high heat resistance. It is processed by injection molding. Edgetek™ PK-30CF/000 FCR BK is... view more

Elastamax™ HTE 1101 by PolyOne is a general purpose styrene block copolymer available in the form of pellets. Is suitable for processing by injection molding. Elastamax™ HTE 1101 is recommended for... view more

Elastamax™ HTE 1102 by PolyOne is a general purpose styrene block copolymer available in the form of pellets. Is suitable for processing by injection molding. Elastamax™ HTE 1102 is recommended for... view more

Elastamax™ HTE 1105 by PolyOne is a general purpose styrene block copolymer available in the form of pellets. Is suitable for processing by injection molding. Elastamax™ HTE 1105 is recommended for... view more

Elastamax™ HTE 3050 by Avient (Formerly PolyOne) is a general purpose, thermoplastic elastomer (TPE) based on polyvinyl chloride (PVC) and nitrile butadiene rubber (NBR) blend. It exhibits excellent resistance to... view more

Elastamax™ HTE 3060 by PolyOne is a general purpose, natural colored thermoplastic elastomer (TPE) based on polyvinyl chloride (PVC) and nitrile butadiene rubber (NBR) blend. Exhibits excellent... view more

Elastamax™ HTE 3070 by PolyOne is a general purpose, natural colored thermoplastic elastomer (TPE) based on polyvinyl chloride (PVC) and nitrile butadiene rubber (NBR) blend. Exhibits excellent... view more

Elastamax™ HTE 3080 by Avient (Formerly PolyOne) is a general purpose, thermoplastic elastomer (TPE) based on polyvinyl chloride (PVC) and nitrile butadiene rubber (NBR) blend. It exhibits excellent resistance to... view more

Elastamax™ HTE 3170 by PolyOne is a general purpose, black thermoplastic elastomer (TPE) based on polyvinyl chloride (PVC) and nitrile butadiene rubber (NBR) blend. Exhibits excellent resistance to... view more

Maxxam™ 34-1520 SSM TFPP by Avient (Formerly PolyOne) is general purpose, polypropylene homopolymer grade reinforced with 20% talc. It provides good stiffness and durability. It is suitable for processing by injection molding... view more

Maxxam™ DP 9052-3-1000 by Avient (Formerly PolyOne) is general purpose, high density 15 % glass fiber reinforced polyethylene grade. It provides good stiffness and durability. It is suitable for processing by injection... view more

Maxxam™ DP-9156-5-8000 is a chemically coupled and general purpose polypropylene copolymer reinforced with 10% glass fiber. Provides good stiffness and durability. Is suitable for processing by... view more

Maxxam™ F5134T2-4 by Avient (Formerly PolyOne) is general purpose, 21% talc and mineral reinforced polypropylene homopolymer grade. It provides good stiffness and durability. It is suitable for processing by injection... view more

Maxxam™ F5134T4-1 is a general purpose, polypropylene homopolymer grade reinforced with 40% talc and mineral. Provides good stiffness and durability. Is suitable for processing by injection molding... view more

Maxxam™ MAXBATCH YM-618.G001-1000 is a general purpose, polypropylene grade reinforced with 70% talc. Provides good stiffness and durability. Is suitable for processing by injection molding... view more

Maxxam™ MAXBATCH YT-818.G001-1000 is a general purpose, high density polyethylene grade reinforced with 70% talc. Provides good stiffness and durability. Is suitable for processing by injection... view more