Akulon® S223-HG6 by Envalior is a heat-stabilized polyamide 66 grade reinforced with 30% glass. It is suitable for processing by injection molding. It is used in consumer goods like off-road vehicle oil... view more

ForTii® WX11-FC by Envalior is a 30% glass-reinforced, drinking water, polyphthalamide grade. This food contact quality is suitable for processing by injection molding. It shows excellent hydrolysis... view more

Stanyl® TS271P4 by Envalior is a high-performance polyamide 4-6 (PA 4-6) grade reinforced with 20% whiskers. It is suitable for processing by injection molding. It provides high mechanical properties... view more

XAREC™ SP130 by Idemitsu Kosan is a lightweight syndiotactic polystyrene (SPS) grade reinforced with 25% MD. It offers low warpage, good hydrolysis-, flowability, enhanced heat and chemical resistance. It... view more

EP4S-80 by Master Bond is a silver-filled, one component epoxy (EP) system. It has low viscosity and offers good flow, dimensional stability, low shrinkage, high modulus and good compressive... view more

LNP™ COLORCOMP™ Compound DX05464 by SABIC is an unreinforced, flame retardant polycarbonate (PC) resin. It is suitable for processing by injection molding. It is available in custom colors. LNP™... view more

LNP™ STAT-KON™ Compound DX11411R by SABIC is an electrically conductive, PFAS-free polycarbonate (PC) resin containing proprietary filler. It offers radar-absorbing properties. It is suitable for processing by... view more

3M™ Dyneon™ PTFE Compound 310160003 is a PTFE compound reinforced with 10% black pigmented Ekonol® (a Trademark of Saint-Gobain Group). It is a non-free-flowing suspension suitable for processing by... view more

3M™ Dyneon™ PTFE Compound 310999212 is a non-free-flowing suspension PTFE compound reinforced with 27% fillers. Is suitable for processing by compression molding. Possesses high thermal stability... view more

3M™ Dyneon™ PTFE Compound FC 15025 is a non-free-flowing suspension PTFE compound reinforced with 25% hard carbon. Is suitable for processing by compression molding. Possesses high thermal... view more

3M™ Dyneon™ PTFE Compound FM 2370081 is a free-flowing suspension PTFE compound reinforced with 10% fillers. Is suitable for processing by compression and automatic molding. Possesses high thermal... view more

3M™ Dyneon™ PTFE Compound PDR 08004 is a free-flowing suspension PTFE compound reinforced with 10% fillers. Is suitable for processing by compression and automatic molding. Possesses high thermal... view more