Hifax PPU X9067HS UV is a UV-stabilized, high crystalline polypropylene (HCPP) copolymer, filled with mineral. Exhibits high melt flow, medium flexural modulus, good stiffness and toughness... view more

Hifax TYC 773X is a paintable, thermoplastic elastomeric olefin (TEO) grade, filled with mineral. Exhibits very high flow, 1,250 MPa flexural modulus, high stiffness, good moldability, toughness... view more

Hostacom CR 1152 F D33086 by LyondellBasell is a non-toxic, high flow, low density, 10% filled, high impact polypropylene (PP) grade designed using resin synthesis and compounding technology. It is... view more

Hostacom EKC 261N by LyondellBasell is a low density, non-toxic, high impact polypropylene (PP) copolymer grade reinforced with mineral. It is available in custom colour, pellet form. Possesses... view more

Hostacom EKC 334N BLACK is a water insoluble, black colored polypropylene copolymer filled with 20% talc. Exhibits good stiffness, toughness, low odor, low emissions and fogging. Is suitable for... view more

Hostacom ERC 198N is a water insoluble, black colored polypropylene (PP) copolymer filled with 20% talc. Exhibits high melt flow rate, high toughness and good UV resistance. Is suitable for... view more

Hostacom ERC 198N C11376 is a water insoluble, black colored polypropylene (PP) copolymer filled with 18% talc. Exhibits high melt flow rate, high toughness and high UV resistance. Is suitable for... view more

Hostacom PPU X9067HS 104908 is a water insoluble, black colored polypropylene (PP) copolymer. Exhibits high melt flow rate, high toughness and increased stiffness. Is suitable for processing by... view more

Hostacom PPU X9067HS 156505 is a water insoluble, grey colored polypropylene (PP) copolymer. Exhibits high melt flow rate, high toughness and increased stiffness. Is suitable for processing by... view more

Hostacom PPU X9067HS C12507 by LyondellBasell is an unfilled, high flow polypropylene (PP) copolymer grade. It is available as a customized color matched, pellet form. Possesses good stiffness, high... view more

Hostacom PPU X9077HS is a water insoluble, grey colored polypropylene (PP) copolymer filled with talc. Exhibits high flowability, high toughness and excellent stiffness. Is suitable for processing... view more

Petrothene NA209009 by LyondellBasell is a soft low density polyethylene (LDPE) grade. Offers good processability, good toughness and low warpage. Is suitable for processing by injection molding... view more

SCHULAMID® 6 GF 15 by LyondellBasell is a general purpose, oil resistant, polyamide 6 grade reinforced with 15% glass fiber. It exhibits good flow, good surface finish, high stiffness, dynamic... view more

SCHULAMID® 6 GF 30 by LyondellBasell is a general purpose, oil resistant, polyamide 6 reinforced with 30% glass fiber. This grade exhibits high stiffness, strength & temperature resistance, high... view more

SCHULAMID® 6 GF 30 H by LyondellBasell is a general purpose, heat stabilized, oil resistant polyamide 6 reinforced with 30% glass fiber. This grade exhibits good heat aging resistance, high... view more

SCHULAMID® 6 NV 12 by LyondellBasell is a general purpose, low viscosity, oil resistant polyamide 6 (PA 6) grade. This grade exhibits high flow, good surface finish, high stiffness, strength &... view more

SCHULAMID® 66 GF 35 H by LyondellBasell is a medium viscosity, heat stabilized, oil resistant polyamide 66 (PA 66) grade reinforced with 35% glass fiber. It is recommended for automotive... view more

SCHULAMID® 66 MV 2 by LyondellBasell is a medium viscosity, oil resistant polyamide 66 (PA 66) grade. It is processed by injection molding. This grade exhibits good surface finish, high stiffness &... view more

SCHULAMID® 66MV3 by LyondellBasell is a heat stabilized, polyamide 66 (PA 66) grade. It exhibits high stiffness & strength, higher short term temperature resistance, high impact resistance and very... view more

Softell TKS 209N NAT is a polypropylene (PP) copolymer grade. Exhibits soft touch, matt surface effects, toughness, good scratch resistance, very low rigidity and gloss. Designed for injection... view more