Desmopan® 192 / CQ192 MBC091 by Covestro is a hydrolysis stabilized, ester-based thermoplastic polyurethane block copolymer grade with high mechanical strength for articles subject to wear. It is suitable for... view more

Desmopan® 445 by Covestro is an ester-based thermoplastic polyurethane (TPU) block copolymer grade with low compression set. It exhibits good heat-, oil- and grease resistance. It is suitable for... view more

Desmopan® 453 by Covestro is an ester based thermoplastic polyurethane (TPU) block copolymer grade with good wear resistance. It exhibits low compression set, oil and grease resistance. It is... view more

Desmopan® 453 DPS 041 by Covestro is a hydrolysis stabilized, ester-based thermoplastic polyurethane block copolymer grade with good wear resistance. It offers low compression set, grease and oil resistance... view more

Desmopan® 460 by Covestro is a heat resistant, ester based thermoplastic polyurethane (TPU) block copolymer grade with short cycle times. It exhibits low compression set, high elasticity, oil- and... view more

EcoPaXX® Q-Y by Envalior is an unfilled, impact-modified, bio-based, long aliphatic polyamide PA4-10 grade. It is suitable for processing by injection molding. It offers good impact and surface... view more

ForTii® F11 by Envalior is a halogen- and red phosphorous-free, chemical resistant, 30% glass-reinforced polyamide 4T (PA4T) grade. It is suitable for processing by injection molding. It offers an... view more

ForTii® JTX2 by Envalior is an electro-friendly, polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding and shows consistent performance. It... view more

ForTii® T11 by Envalior is a halogen- & red phosphorous-free, electro-friendly, polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It offers good chemical resistance. It is suitable for... view more

ForTii® TX1 by Envalior is a halogen- & red phosphorous-free, electro-friendly, polyamide 4T (PA4T) grade reinforced with 30% glass fiber. It shows robust mechanical & JEDEC Level 2 performance... view more

ANSAGLASS A07 000 0000 000 A by Ansa Termoplastici is a transparent, UV stabilized polymethylmethacrylate (PMMA) grade. Exhibits good weather resistance. Available in Europe as amorphous granules. Is suitable for processing... view more

LEONA™ SN105 by Asahi Kasei is a red phosphorous- & halogen-free, polyamide 66 and semi-aromatic polyamide grade reinforced with 50% glass fiber. It is suitable for processing by injection molding... view more