Apec® RW1697 by Covestro is an easy-flowing, easy release, amorphous polycarbonate (PC) grade. It is an UV stabilized grade and exhibits high heat resistance, high toughness, high transparency and... view more

Akulon® CO-KGV4/A JN.00.86 by Envalior is a halogen-free, flame-retardant polyamide 6 grade reinforced with 20% glass fiber. It is suitable for processing by injection molding. Used in molded case circuit breakers... view more

Akulon® K222-KGMV14 by Envalior is a halogen- & phosphorous-free, flame-retardant polyamide 6 grade reinforced with 5% glass and 20% mineral fiber. It is suitable for processing by injection molding. It is... view more

THERMOLAST® K TC8NEG-BLCK by Kraiburg is a soft, halogen-free thermoplastic elastomer (TPE) with electrical conductivity. It shows adhesion to PP, PA 6 & PA 6.6. It exhibits non-sticky haptic, low resistivity and... view more

THERMOLAST® TC8OEX-BLCK by Kraiburg is a halogen-free, soft, electrically conductive thermoplastic elastomer (TPE). It provides non-sticky haptic, low resistivity, good PP adhesion and in-process recycling is... view more

NORYL™ Resin N190X (Americas) by SABIC is a non-reinforced, heat stabilized & impact modified blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade... view more

NORYL™ Resin N190X (Asia) by SABIC is a non-reinforced, heat stabilized & impact modified blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains... view more

4LEX® 10F10000 by 4Plas is a standard flow polycarbonate grade. Is suitable for general purpose extrusion. Provides high stiffness, high gloss surface finish, good mechanical strength, high... view more

4LEX® 10F13100 is a flame retardant(UL94 V-0 at 1.6mm) polycarbonate standard flow grade. Is suitable for injection molding application. Provides high stiffness, high gloss surface finish, good... view more

4LEX® 10F13301 by 4Plas is a UV stabilized polycarbonate grade. Is suitable for injection molding application. Shows exceptional impact resistance, heat distortion and optical clarity which meets... view more

4LEX® 10F14300 by 4Plas is a high impact polycarbonate grade. Is suitable for injection molding application. Provides high stiffness, high gloss surface finish, good mechanical strength, high... view more

4LEX® 10F20000 by 4Plas is an easy flow general purpose injection molding grade of Polycarbonate. Provides high stiffness, high gloss surface finish, good mechanical strength, high dimensional... view more

ADENE® B03CZE-00 is an azure white colored, polypropylene (PP) homopolymer reinforced with 70% mineral fibers. Is a high-performance compound based on recycled PP. Is suitable for processing by... view more

ADENE® B06CZE--00 by A.D. Compound is a white colored, polypropylene (PP) homopolymer reinforced with 70% mineral fibers. Is a high-performance compound based on recycled PP. Is suitable for processing by... view more

ADENE® B36KYB--00 by A.D. Compound is a white colored, polypropylene (PP) homopolymer reinforced with 10% mineral fibers. Is a high-performance compound based on recycled PP. Is suitable for processing by... view more

ADENE® B36VYBG-02 by A.D. Compound is a white colored, polypropylene (PP) copolymer reinforced with 10% mineral fibers. It is a high-performance compound based on recycled PP. It is suitable for processing by... view more

ADENE® G05CYEG-00 by A.D. Compound is a grey colored, polypropylene (PP) copolymer reinforced with 10% mineral fibers. Is a high-performance compound based on recycled PP. ADENE® G05CYEG-00 is suitable for processing... view more