SLOVAMID® 6 GF 10 is a polyamide 6 (PA6) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for electro tools, hobby tools... view more

SLOVAMID® 6 GF 10 FRC 2 is a flame retardant polyamide 6 (PA6) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for... view more

SLOVAMID® 6 GF 10 GB 20 is a polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20% glass beads. Suitable for processing by injection molding. Recommended for manufacturing of grips for... view more

SLOVAMID® 6 GF 10 GB 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20 % glass beads. Exhibits good moldability and strength. Suitable for processing by... view more

SLOVAMID® 6 GF 15 is a polyamide 6 (PA6) grade reinforced with 15% glass fibers. Exhibits good impact resistance and impact strength. Suitable for processing by injection molding. Recommended for... view more

SLOVAMID® 6 GF 15 FRA 5 is a halogen-free, flame retardant polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for electrical... view more

SLOVAMID® 6 GF 15 HI by Plastcom is a polyamide 6 (PA6) grade reinforced with 15% glass fibers. It exhibits improved impact strength. It is suitable for processing by injection molding. It is recommended for... view more

SLOVAMID® 6 GF 15 HI TS is a heat stabilized, impact modified polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of... view more

SLOVAMID® 6 GF 20 is a polyamide 6 (PA6) grade reinforced with 20% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for electro tools, hobby tools... view more

SLOVAMID® 6 GF 20 GB 10 is a heat stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers and 10% glass beads. Exhibits good impact strength, good moldability and strength. Suitable for... view more

SLOVAMID® 6 GF 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers. Suitable for processing by injection molding. Recommended for manufacture of grips for electro... view more

SLOVAMID® 6 GF 25 is a polyamide 6 (PA6) grade reinforced with 25% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for manufacturing of... view more

SLOVAMID® 6 GF 25 FRA 5 is a halogen-free, flame retardant polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for electrical... view more

SLOVAMID® 6 GF 25 FRG 5 is a halogen-free, flame retardant polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for electrical... view more

SLOVAMID® 6 GF 25 T 15 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with glass and mineral fibers. Exhibits improved anisotrophy of shinkage. Suitable for processing by injection... view more

SLOVAMID® 6 GF 30 by Plastcom is a polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high strength and toughness. SLOVAMID® 6 GF 30 is suitable for processing by injection molding. Recommended... view more

SLOVAMID® 6 GF 30 FRG 5 is a flame retarded polyamide 6 (PA6) grade with halogen-free flame retardant and reinforced with 30% glass fibers. Suitable for processing by injection molding. Used in... view more

SLOVAMID® 6 GF 30 HI is a polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits good moldability and good impact strength. Suitable for processing by injection molding. Recommended for... view more

SLOVAMID® 6 GF 30 TS by Plastcom is a heat stabilized polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high heat resistance. Suitable for processing by injection molding. Recommended for... view more

SLOVAMID® 6 GF 33 by Plastcom is a polyamide 6 (PA6) grade reinforced with 33% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended for... view more