SLOVAMID® 6 BT HV TLS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding and extrusion methods. SLOVAMID® 6 BT HV TLS is recommended for... view more

SLOVAMID® 6 BT LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 BT LS is recommended for sports equipment and electrical and electronical... view more

SLOVAMID® 6 BT TLS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 BT TLS is recommended for sports equipment and... view more

SLOVAMID® 6 FRB 4 LS by Plastcom is a flame retardant, UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRB 4 LS is recommended for electrical and... view more

SLOVAMID® 6 FRC 2 LS is an UV stabilized, halogen-free, flame retartdant polyamide 6 (PA6) grade. Allows long-term external use because of stabilization with the light stabilizers on the HALS basis... view more

SLOVAMID® 6 GF 15 LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 15% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 15 LS is recommended... view more

SLOVAMID® 6 GF 15 T 25 LTS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 40% talc and glass fiber. Designed for injection molding method. SLOVAMID® 6... view more

SLOVAMID® 6 GF 25 FRA 5 LS by Plastcom is an UV stabilized, flame retardant polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF... view more

SLOVAMID® 6 GF 25 LTS by Plastcom is a heat- , light- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 25... view more

SLOVAMID® 6 GF 30 LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30 LS is recommended... view more

SLOVAMID® 6 GF 35 LS by Plastcom is an UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 35% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 35 LS is recommended... view more

SLOVAMID® 6 GF 50 LS by Plastcom is a light- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 50% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 50 LS is... view more

SLOVAMID® 6 GF 50 LTS by Plastcom is a heat- and UV-stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 50% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 50 LTS is recommended for... view more

SLOVAMID® 6 NG GF 20 is a polyamide 6 (PA6) grade reinforced with 20% glass fibers. Exhibits high impact resistance. Suitable for processing by injection molding. Recommended for manufacturing of... view more

SLOVAMID® 6 NG GF 20 HLS is a UV stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers. Exhibits good hydrolysis resistance and surface finish. Suitable for processing by injection... view more

SLOVAMID® 6 NG GF 30 LS is a UV stabilized polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high impact strength. Suitable for processing by injection molding. Recommended for... view more

SLOVAMID® 6 NG GF 30 TS by Plastcom is an heat stabilized polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high impact strength. Suitable for processing by injection molding. SLOVAMID® 6 NG GF 30 TS is... view more

SLOVAMID® 6 NG GF 45 SGF is a UV stabilized polyamide 6 (PA6) grade reinforced with 45% glass fibers. Exhibits high strength and toughness. Suitable for processing by injection molding. Recommended... view more

SLOVAMID® 6 NG1 GF 20 HLS is a UV stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers. Exhibits good surface finish, hydrolysis resistance and scratch resistance. Suitable for... view more

SLOVAMID® 66 BT LS by Plastcom is an UV stabilized polyamide 66 (PA 66 / Nylon 66) grade. Designed for injection molding method. SLOVAMID® 66 BT LS is recommended for automotive, electrical and... view more