Desmopan® 392 by Covestro is non-reinforced, ester-based thermoplastic polyurethane (TPU) block copolymer grade with high wear resistance. It exhibits high mechanical strength, flexibility across a... view more

Desmopan® 445 by Covestro is an ester-based thermoplastic polyurethane (TPU) block copolymer grade with low compression set. It exhibits good heat-, oil- and grease resistance. It is suitable for... view more

Desmopan® 453 by Covestro is an ester based thermoplastic polyurethane (TPU) block copolymer grade with good wear resistance. It exhibits low compression set, oil and grease resistance. It is... view more

Desmopan® 453 DPS 041 by Covestro is a hydrolysis stabilized, ester-based thermoplastic polyurethane block copolymer grade with good wear resistance. It offers low compression set, grease and oil resistance... view more

Desmopan® 460 by Covestro is a heat resistant, ester based thermoplastic polyurethane (TPU) block copolymer grade with short cycle times. It exhibits low compression set, high elasticity, oil- and... view more

Arnitel® EM400 by Envalior is a high-performance, non-reinforced & non flame retarded thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus... view more

Arnitel® EM460 by Envalior is a high-performance, non-reinforced & non flame retarded, thermoplastic copolyester (TPC). It is a lighter, smarter, greener alternative to conventional rubbers thus... view more

XAREC™ S135 by Idemitsu Kosan is a light weight syndiotactic polystyrene (SPS) grade reinforced with 30% glass fiber. It offers good electrical, dielectric properties, moldability, dimensional &... view more

EP3HTSMed by Master Bond is silver filled, two-component epoxy (EP) system. It is durable and biocompatible. Exhibits high strength, adhesion and good electrical- and thermal conductivity. Offers... view more

Supreme 10HT by Master Bond is a durable, one-component epoxy (EP) system. Provides high adhesion, viscosity, high sheer- & peel strength, low shrinkage and good dimensional stability. Exhibits good... view more

Wanthane® WHT-K885FC by Wanhua Chemical is an aromatic polyester-based thermoplastic polyurethane (TPU) grade. It exhibits impact strength, toughness, and good low temperature flexibility. It offers outstanding... view more

3M™ Dyneon™ Perfluoroelastomer E-21464 by 3M-Dyneon is a high temperature perfluoroelastomer grade. Shows outstanding low long term compression set at high temperatures and resistance to HTS oils &... view more

3M™ Dyneon™ Perfluoroelastomer PFE 7301BZ by 3M-Dyneon is a high temperature perfluoroelastomer grade. Shows outstanding low long term compression set at high temperatures, excellent physical... view more

AFLAS® 200P (SPL-FKM) by AGC is a peroxide-curable, specialty fluoropolymer grade. Exhibits outstanding heat-, base-, acids-, many solvents and ozone resistance. Offers improved cold temperature... view more

KRYNAC® 2645 F is a cold polymerized butadiene acrylonitrile copolymer by Arlanxeo. It is non-staining, stabilized, slow-curing, pre-crosslinked, oil extended and carboxylated polymer. Offers... view more

KRYNAC® 2840 F by ARLANXEO is a cold polymerized butadiene acrylonitrile copolymer. It is a non-staining, stabilized, slow-curing, pre-crosslinked, oil extended and carboxylated polymer. It offers... view more

KRYNAC® 2850 F by ARLANXEO is a cold polymerized butadiene acrylonitrile copolymer. It is a non-staining, stabilized, slow-curing, pre-crosslinked, oil extended and carboxylated polymer. It offers... view more