TRISTAR® PC-06R by Amco Polymers is an amorphous, naturally transparent (to light) polycarbonate resin. Exhibits good mold release, good thermal resistance, high heat resistance and fair chemical... view more

Pebax® 2533 SD 02 by Arkema is a heat-, light-, UV-stabilized, polyether block amide (PEBA) grade. It contains lubricants, antiblocking agent and mold release additive. This thermoplastic elastomer... view more

ReDefyne™ IAG25 BK0806 by Ascend Performance Materials is a general purpose, lubricated polyamide 66 and polyamide 6 (PA 66 + PA 6) grade filled with 25% glass fiber. It is a bromine-free, medium viscosity, non-corrosive... view more

Dynaflex™ G2703-1000-00 is a translucent thermoplastic elastomer (TPE) grade. Provides excellent colorability, rubbery feel and soft touch. Shows improved mold release and low friction. Is a... view more

OnFlex™ S KE 70A-3E1726 SO10 by Avient (Formerly PolyOne) is a scratch resistant, hydrogenated styrenic block copolymer (SBC). It exhibits wide hardness range, low temperature flexibility, excellent... view more

Crastin® T841FR NC010 by Celanese is a flame retardant polybutylene terephthalate (PBT) grade reinforced with 10% glass fiber. Exhibits good toughness and good mold release. Is suitable for processing by... view more

Crastin® T843FR NC010 by DuPont is a toughened, flame retardant polybutylene terephthalate (PBT) grade reinforced with 20% glass fiber. It is available in the form of pellets. Exhibits good impact... view more

Hytrel® 60LW by Celanese is a lubricated, thermoplastic polyester elastomer (TPE) grade available in the form of pellets. Exhibits good mold release, good abrasion and wear resistance. Hytrel® 60LW can... view more

Zytel® 151L NC010 by Celanese is an unreinforced, lubricated polyamide 6-12 (PA 6-12) grade with good mold release. Provides an innovative and growing portfolio of flexible polymers with excellent... view more

Zytel® 157HSL BK010 by Celanese is an unreinforced, heat stabilized polyamide 6-12 (PA 6-12) grade with good mold release. It is available in the form of pellets. Zytel® 157HSL BK010 is suitable for processing by... view more

TECHNYL® C 548B BLACK by DOMO Chemicals is a high viscosity, unreinforced polyamide 6 grade for extrusion blow molding. Offers high toughness, good processing behavior, high impact resistance at low... view more

Bionate® II PCU 55D by Envalior is a thermoplastic polycarbonate-urethane. It is recommended for long-term implants. It offers toughness, inherent bio-stability, enhanced performance, improved oxidative... view more

Bionate® II PCU 80A by Envalior is a thermoplastic polycarbonate-urethane. It is recommended for long-term implants. It is suitable for pacemaker leads, ventricular assist devices, catheters, hip/knee... view more

Bionate® II PCU 90A by Envalior is a thermoplastic polycarbonate-urethane. It offers toughness, inherent bio-stability, enhanced performance, improved oxidative stability, abrasion resistance, reduced... view more

Carbotex® KV-75FD by Kotec is a polycarbonate (PC) grade. Is a food contact approved grade. Exhibits mold release and high viscosity. Designed for extrusion process. Carbotex® KV-75FD is recommended... view more

Kotex® KV-75FD by Kotec is a polycarbonate (PC) grade. Is a food contact approved grade. Exhibits mold release and high viscosity. Designed for extrusion process. Kotex® KV-75FD is recommended for... view more