Akulon® K224-G6U by Envalior is a 33% glass reinforced polyamide 6 grade. It is suitable for processing by injection molding and offers good chemical resistance. Akulon® K224-G6U is used in consumer good... view more

Akulon® K224-HGM35 by Envalior is a heat-stabilized polyamide 6 grade reinforced with 15% glass and 25% mineral. Offers good chemical resistance and is suitable for processing by injection molding... view more

Akulon® K224-LPG6U by Envalior is polyamide 6 grade reinforced with 33% glass fiber. It offers good chemical resistance. It is suitable for processing by injection molding. Akulon® K224-LPG6U is used in consumer... view more

Akulon® K224-PG3 by Envalior is an impact-modified polyamide 6 grade reinforced with 15% glass. It is suitable for processing by injection molding. Offers good chemical resistance. Akulon® K224-PG3 is used in... view more

Akulon® K224-PG6 by Envalior is a 30% glass-reinforced, impact-modified polyamide 6 grade. Offers good chemical resistance and is suitable for processing by injection molding. Recommended for consumer... view more

NORYL GTX™ Resin 830 (Asia) by SABIC is a heat stabilized, structural polyphenylene ether (PPE) and polyamide (nylon) alloy reinforced with 30% glass fiber. It shows high stiffness, heat resistance... view more

NORYL™ Resin GFN1 (Americas) by SABIC is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very... view more

NORYL™ Resin GFN1 (Asia) by SABIC is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very... view more

NORYL™ Resin GFN1 (Europe) by SABIC is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very... view more

NORYL™ Resin GFN2 (Americas) by SABIC is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very... view more