TPX™ DX231 by Mitsui Chemicals is a high modulus polymethylpentene with excellent transparency equivalent to glass and acrylic. It boasts superior releasability and is one of the lightest polymer... view more

TPX™ DX820 is a high modulus polymethylpentene by Mitsui Chemicals. Possesses low density, excellent transparency equivalent to glass and acrylic as well as high melting point and can be used at... view more

TPX™ MX002 is a low modulus, low density, heat resistant polymethylpentene by Mitsui Chemicals. Exhibits gas permeability, low refractive index, low dielectric property and high insulation... view more

DOW™ LDPE PG 7004 by Dow is low-density polyethylene (LDPE) homopolymer grade. Exhibits low volatile organic compound (VOC) emission, excellent drop down, good edge stability and low neck-in... view more

ESENTTIA 40H92-SBC by Esenttia (Ecopetrol Business Group) is a controlled rheology, high melt flow rate polypropylene homopolymer grade. Offers excellent uniformity in the spinning of low-density... view more

Circulen 2420K Plus by LyondellBasell is a circular, non-additivated, low density polyethylene grade. It exhibits good processability and very good heat seal. It offers excellent optical properties... view more

Petrothene NA206000 by LyondellBasell is a low density polyethylene (LDPE) grade. Exhibits excellent toughness, softness, good processability and excellent dimensional stability. Offers minimum... view more

Petrothene NA214000 by LyondellBasell is a low density polyethylene (LDPE) grade. Offers low neck-in. Is suitable for processing by extrusion coating and injection molding. Available as translucent... view more

ACRYLITE® Resist AG 100 is an impact-modified, completely recyclable polymethyl methacrylate (PMMA) grade by Roehm. Possesses low weight and up to 30 times breaking strength of mineral glass... view more

PLEXIGLAS® Resist AG 100 by Roehm is an impact-modified, completely recyclable PMMA (polymethyl methacrylate) grade. Possesses low weight and up to 30 times breaking strength of mineral glass. Exhibits high... view more

RIBLENE® GM 20 R is a low density polyethylene (LDPE) grade. Exhibits medium fluidity and low neck-in. Designed for blowm film extrusion, injection molding and coating applications. Recommended for... view more

RIBLENE® GP 20 R is a low density polyethylene (LDPE) grade. Exhibits high fluidity and draw-down, low neck-in and excellent organoleptic properties. Designed for injection molding and extrusion... view more