Arnitel® EM550-H by Envalior is heat-stabilized, high performance, thermoplastic copolyester grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing environmental... view more

Arnitel® EM630-H by Envalior is a high-performance, heat stabilized, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

Arnitel® PM581 by Envalior is a high-performance, thermoplastic co-polyester (TPC). It is processed by film-, profile- and sheet extrusion. It offers flexibility, strength and excellent processing... view more

Orgalloy® LT 5050 T6L NAT by Arkema is a standard, highly flexible (500 MPa) polyamide 6 (PA 6 / Nylon 6) alloy grade with low density. It is a platable, light-, heat- and UV stabilized grade... view more

OnFlex™ HT 50A-3S2099 by Avient (Formerly PolyOne) is an ozone resistant, hydrogenated styrenic block copolymer (SBC). It is processed by injection molding and extrusion. It exhibits high heat resistance, excellent mechanical... view more

OnFlex™ HT 60A-3S2101 by Avient (Formerly PolyOne) is an ozone resistant, hydrogenated styrenic block copolymer (SBC). It exhibits high heat resistance, excellent mechanical properties, wide hardness range, good... view more

OnFlex™ HT 70A-3S2103 by Avient (Formerly PolyOne) is an ozone resistant, hydrogenated styrenic block copolymer (SBC). It exhibits high heat resistance, excellent mechanical properties, wide hardness range, good... view more

Zytel® FN727 NC010A by Celanese is an impact modified, plasticizer-free, heat stabilized, flexible polyamide 6 alloy resin having good low temperature toughness and good heat aging. Exhibits high mechanical... view more

NEOFLON™ FEP NP-130 by Daikin is a perfluoroethylene propylene (FEP) copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). It exhibits high stress crack resistance, resistance to... view more

NEOFLON™ PCTFE M-300H by Daikin is a high molecular weight, rigid, high performance, chlorotrifluoroethylene homopolymer. It shows excellent dimensional stability, heat seal, low moisture absorption... view more

NEOFLON™ PCTFE M-300P by Daikin is a rigid, high performance, general purpose, chlorotrifluoroethylene (CTFE) homopolymer. Exhibits good melt flow processability, high compressive strength, low... view more

NEOFLON™ PCTFE M-400H by Daikin is a high molecular weight, rigid, high performance, chlorotrifluoroethylene homopolymer. Exhibits good melt flow processability, high compressive strength, low... view more

Denka Chloroprene ES-40 by Denka is a chloroprene rubber (CR) grade. Exhibits very slow crystallization rate and durability. Possesses flame retardant, adhesive strength, easy processability and... view more

Denka Chloroprene ES-70 by Denka is a high viscosity, chloroprene rubber (CR) grade. Exhibits very slow crystallization rate and durability. Possesses flame retardant, adhesive strength, easy... view more

DOW™ HDPE DGDA-2485 NT is a white colored, high density polyethylene (HDPE) grade. Possesses high toughness and exhibits good processability. Can be processed by profile extrusion. Used in... view more

DOWLEX™ 2377 polyethylene resin is an ethylene-octene-1 copolymer. Is suitable for processing by extrusion. It has a unique molecular structure with a controlled side chain distribution that... view more

DOWLEX™ 2388 by Dow is a white colored ethylene/octene-1 copolymer grade. It offers stress crack resistance, good processability and is suitable for elevated temperatures without crosslinking... view more

NORDEL™ IP 4570 by Dow Chemical is an ethylene propylene diene monomer (EPDM) grade with medium molecular weight distribution. Contains 50% of mass ethylene, 4.9% of mass 5-ethylidenenorbornene... view more

NORDEL™ IP 4760P by Dow is a medium molecular weight distribution ethylene propylene diene monomer (EPDM) grade. It has a mass of 67 percent ethylene, 4.9 percent 5-ethylidenenorbornene (ENB), and... view more