Akulon® K224-PG3 by Envalior is an impact-modified polyamide 6 grade reinforced with 15% glass. It is suitable for processing by injection molding. Offers good chemical resistance. Akulon® K224-PG3 is used in... view more

Akulon® K224-PG6 by Envalior is a 30% glass-reinforced, impact-modified polyamide 6 grade. Offers good chemical resistance and is suitable for processing by injection molding. Recommended for consumer... view more

Akulon® K224-TG9 by Envalior is polyamide 6 grade reinforced with 45% glass. It is suitable for processing by injection molding. Offers good chemical resistance. Akulon® K224-TG9 is used in consumer goods and... view more

Akulon® Ultraflow K-FG12 by Envalior is a high-flow polyamide 6 grade reinforced with 60% glass fiber. Exhibits good mechanical properties (stiffness and toughness) and better surface appearance than PA66. It is... view more

EcoPaXX® Q-HG6 by Envalior is a heat-stabilized, 30% glass-fiber-reinforced, long aliphatic polyamide (PA410) based on castor oil. It is processed by injection molding. It is particularly suitable for... view more

LNP™ LUBRICOMP™ Compound AG5LT2 by SABIC is a polyamide 6-6 (nylon 6-6) resin reinforced with 25% glass fiber and 10% polytetrafluoroethylene (PTFE). Shows wear resistance and is suitable for processing by injection... view more

LNP™ LUBRICOMP™ Compound CZL36 by SABIC is a wear-resistant polystyrene (PS) resin reinforced with 30% milled glass and 10% polytetrafluoroethylene (PTFE). It is suitable for processing by injection molding... view more

LNP™ LUBRICOMP™ Compound DBL32 by SABIC is a polycarbonate (PC) resin reinforced with 10% glass bead and 15% polytetrafluoroethylene. It offers good wear resistance, good dimensional stability and low warpage. It... view more

LNP™ LUBRICOMP™ Compound DFI14 by SABIC is a polystyrene (PS) resin filled with 20% glass fiber and 2% silicone. It shows wear resistance and is suitable for processing by injection molding. LNP™... view more

LNP™ LUBRICOMP™ Compound DFL12 (Americas) by SABIC is a polycarbonate (PC) resin filled with 10% glass fiber and 5% polytetrafluoroethylene (PTFE). Shows wear resistance and is suitable for... view more