Bayblend® T85 XUV by Covestro is a general purpose, UV stabilized, polycarbonate & acrylonitrile butadiene styrene (PC+ABS) blend. It shows good injection molding processing behavior (easy flowing) and... view more

BAPOLAN® 6409 by Bamberger Polymers is a white, translucent or offwhite colored polystyrene (PS) resin. Exhibits superior impact and gloss. Is suitable for processing by injection molding. Recommended for... view more

BAPOLAN® 6450 by Bamberger Polymers is a white, translucent or offwhite colored, general purpose, high impact polystyrene (HIPS) resin. Exhibits fast cycle times, superior impact and gloss. Is... view more

H 103 by Braskem is a translucent/ white, high melt flow polypropylene additivated homopolymer grade. Does not contain the substance Bisphenol A (BPA, CAS # No. 80-05-7) in its composition... view more

H 107 by Braskem is a translucent/ white, ultra-high melt flow polypropylene homopolymer grade. Does not contain the substance Bisphenol A (BPA, CAS # No. 80-05-7) in its composition. Insoluble in... view more

H 203 by Braskem is a translucent/ white, general purpose, high melt flow polypropylene homopolymer grade. Does not contain the substance Bisphenol A (BPA, CAS # No. 80-05-7) in its composition... view more

H 503 by Braskem is a low melt flow polypropylene additivated homopolymer grade. It exhibits excellent processability, good melt stability, good stiffness & impact strength balance and low odor and... view more

H700-12 by Braskem is a general purpose, polypropylene homopolymer grade. Does not contain additives with heavy metals or organotin-based materials. Insoluble in water. It can be processed using... view more

POLYLAC® PA-757H by Chi Mei is a high gloss, general purpose acrylonitrile butadiene styrene (ABS) grade. Offers medium strength and better balance in high flow & high impact properties. Suitable... view more

DOMAMID® 66SN is an unreinforced, general purpose polyamide 66 (PA 66) grade. Exhibits high mechanical strength & stiffness, rigidity, thermal stability, good impact resistance even at low... view more

DOMAMID® 66SNH is an unreinforced, heat stabilized, general purpose polyamide 66 (PA 66) grade. Exhibits high mechanical strength & stiffness, rigidity, thermal stability, good impact resistance... view more

ECONAMID® ORO 6 is an unreinforced, eco-friendly, general purpose, high viscosity, titanium-free polyamide 6 (PA 6) grade based on high quality pre-consumer fiber waste. It is produced 100 % from... view more

ELIX ABS E-LOOP M220 CR by ELIX Polymers is a general purpose acrylonitrile-butadiene-styrene (ABS) grade. It is suitable for processing by injection molding. It provides good flow characteristics. It is designed... view more