EP5G-80 is a graphite filled, one-component epoxy (EP) system by Master Bond. Exhibits low coefficient of thermal expansion, good lubricity and good thermal- & electrical conductivity. Provides low... view more

LNP™ LUBRICOMP™ Compound CG002XXN by SABIC is a PFAS-free, wear resistant, heat stabilized compound based on polystyrene resin filled with graphite. It is suitable for processing by injection molding. LNP™ LUBRICOMP™ Compound CG002XXN is... view more

LNP™ LUBRICOMP™ Compound CG006 by SABIC is a wear resistant, PFAS-free, polystyrene (PS) resin filled with graphite. It is suitable for processing by injection molding. LNP™ LUBRICOMP™ Compound CG006 is used in water management... view more

LNP™ LUBRICOMP™ Compound CGI11XP by SABIC is a wear-resistant polystyrene resin reinforced with graphite. It is suitable for processing by injection molding. LNP™ LUBRICOMP™ Compound CGI11XP is used in water management and building... view more

LNP™ LUBRICOMP™ Compound LGL33 by SABIC is an electrically conductive, non-halogenated & lubricated polyetheretherketone (PEEK) reinforced with graphite and 15% PTFE. It offers friction as well as... view more

LNP™ LUBRICOMP™ Compound MG004 by SABIC is an electrically conductive polypropylene (PP) grade reinforced with graphite powder. Exhibits mold release, wear resistance and friction. Recommended for... view more

3M™ Dyneon™ Compound NST 1111R by 3M is a free-flowing suspension PTFE compound reinforced with 5% graphite and 10% of an appropriate filler. Is suitable for processing by ram extrusion, compression and... view more

3M™ Dyneon™ Modified PTFE Compound TF R4212 is a free-flowing suspension PTFE compound reinforced with 10% electro-graphitized carbon. Is suitable for processing by ram extrusion. Possesses high... view more

3M™ Dyneon™ PTFE Compound 310192004 is a non-free-flowing suspension PTFE compound reinforced with 35% carbon graphite. Is suitable for processing by compression molding. Possesses high thermal... view more

3M™ Dyneon™ PTFE Compound FC 16863 is a non-free-flowing suspension PTFE compound reinforced with 62.5% bronze/graphite filler. Is suitable for processing by compression molding. Possesses high... view more

3M™ Dyneon™ PTFE Compound FC 18050 is a non-free-flowing suspension PTFE compound reinforced with 62.5% bronze/graphite filler. Is suitable for processing by compression molding. Possesses high... view more