Makrolon® 2458 by Covestro is a low viscosity polycarbonate (PC) grade. It is suitable for EtO and steam sterilization at 121°C. It exhibits easy release, high heat resistance, good toughness, good... view more

Stanyl® TC154 by Envalior is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It exhibits thermally conductivity and flame-retardant characteristics. It provides high mechanical... view more

Stanyl® TW272B6 by Envalior is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 30% carbon fiber. It is suitable for processing by injection molding. It... view more

4LAC® 10H30000 by 4Plas is a high flow acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent processing properties, high dimensional stability, good mechanical strength, electrical... view more

4LAC 25H30000 is a high flow acrylonitrile butadiene styrene (ABS) grade. Exhibits excellent processing properties, high dimensional stability, good mechanical strength, electrical properties... view more

4MID® 9A32325 by 4Plas is a semi-crystalline, high flow polyamide 66 (PA 66) grade reinforced with 25 % glass fiber and bead. It is insoluble in water and exhibits excellent stiffness, high... view more

4MID® 9A32335 I by 4Plas is an impact modified, semi-crystalline polyamide 66 (PA 66) grade reinforced with 35 % glass fiber and bead. It is insoluble in water and exhibits high flow, excellent... view more

4MID® 9A34100 H by 4Plas is a semi-crystalline, low impact, heat stabilized polyamide 66 (PA 66) grade. It is insoluble in water and exhibits high flow, excellent stiffness, high mechanical... view more

Fluon® G307 by AGC is an agglomerated, general purpose polytetrafluoroethylene (PTFE) grade available in the form of free-flowing powder. Exhibits excellent flow characteristics. Articles molded... view more

Fluon® G355 by AGC is a fine agglomerated polytetrafluoroethylene (PTFE) grade available in the form of free-flowing powder. Exhibits high bulk density and excellent flow characteristics. It... view more

KELTAN® 2470S by ARLANXEO is a crystalline ethylene-propylene rubber. It has high ethylene and low Mooney viscosity that contribute to excellent flow properties in combination with a good level of... view more

LEVAPREN® 500 PXL VP by Arlanxeo is a cost effective, high viscosity ethylene-vinyl acetate (EVM) copolymer. It is a pre-crosslinked grade with 50% by weight vinyl acetate. It is dusted with... view more

LEVAPREN® 600 PXL VP by Arlanxeo is a cost effective, high viscosity ethylene-vinyl acetate (EVM) copolymer. It is dusted with separating agents like silica and talc. It is a pre-crosslinked grade... view more