Corton 200 TF HS is a polypropylene homopolymer grade by PolyPacific, reinforced with 20% talc. Exhibits low to medium flow, low shrinkage, high stiffness, rigidity, good molding, better surface... view more

Corton 7157 TF HS is a low flow polypropylene copolymer grade by PolyPacific, reinforced with 20% talc. Exhibits good rigidity, molding, impact strength and better surface appearance. Provides... view more

Corton C3 300 TF HS is a low to medium flow polypropylene copolymer grade by PolyPacific, reinforced with 30% talc. Exhibits rigidity, good molding, better surface appearance and good impact... view more

Edge DG 2001 is a very low flow, high impact polypropylene copolymer grade by PolyPacific. Exhibits excellent impact/rigidity balance, high molecular weight and good melt strength. Edge DG 2001 is... view more

Edge DG 2015 is a low to medium flow, high impact polypropylene copolymer grade by PolyPacific. Exhibits excellent impact/rigidity balance and good rigidity at elevated temperatures. Edge DG 2015 is... view more

Edge DG 2203 is a very low flow polypropylene homopolymer grade by PolyPacific. Exhibits good colorability and impact/rigidity balance. Edge DG 2203 is suitable for processing by extrusion. Used for... view more

Edge DG2003 is a low flow polypropylene copolymer grade by PolyPacific. Exhibits high impact strength at sub-ambient temperatures and good rigidity at elevated temperatures. Edge DG2003 is suitable... view more

Edge DG2005 is a low flow, high impact polypropylene copolymer grade by PolyPacific. Exhibits excellent impact/rigidity balance and good rigidity at elevated temperatures. Edge DG2005 is suitable... view more

Epalex 7572 is a low flow polypropylene grade by PolyPacific, reinforced with 25% mineral. Exhibits good molding, high rigidity, high impact strength, better surface appearance and dimensional... view more

Epalex 7573 UVH is a low flow, rubber modified polypropylene grade by PolyPacific. Exhibits high gloss, excellent UV stability, improved mar resistance and stability to provide long term protection... view more

Epalex 7581/3 is a very low flow, rubber modified polypropylene grade by PolyPacific. Exhibits low gloss, very good tear strength, good flexibility and excellent wear resistance. Epalex 7581/3 is... view more

Epalex PDR 7380/2 UV3 is a low flow, rubber modified polypropylene grade by PolyPacific. Exhibits greater flexibility, low surface hardness and excellent impact strength at -40°C or below. Provides... view more

Extron 200 GF HS by PolyPacific is a low flow polypropylene homopolymer grade, reinforced with 20% glass fiber. Exhibits low mold shrinkage, high rigidity, good molding and high heat deflection temperature... view more

Extron 300 GF HS is a low flow polypropylene homopolymer grade by PolyPacific, reinforced with 30% glass fiber. Exhibits low mold shrinkage, high rigidity, good molding, excellent creep resistance... view more

Extron 3085/3 UVH is a low flow, coupled polypropylene grade by PolyPacific, reinforced with 40% glass fiber. Exhibits good impact strength, good molding, excellent creep resistance, high flexural... view more

Polycomp 6017 is an unfilled, low flow polypropylene copolymer grade by PolyPacific. Exhibits water resistance at elevated temperatures and pressures. Polycomp 6017 is suitable for processing by... view more

Polycomp 6019 is a low to medium flow polypropylene homopolymer grade by PolyPacific, reinforced with PTFE. Exhibits low co-efficient of friction and high lubricity. Polycomp 6019 is suitable for... view more

Polycomp CA 03 UVH is an unfilled, UV stabilized polypropylene copolymer grade by PolyPacific. Exhibits low to medium flow and combination of good impact strength and rigidity. Polycomp CA 03 UVH is... view more

Polycomp CB 01/2 HSE is an unfilled, low flow polypropylene copolymer grade by PolyPacific. Exhibits good impact resistance and stability for long term contact with boiling water- and glycol... view more

Propak 1236 by PolyPacific is a low flow polypropylene homopolymer grade by PolyPacific, reinforced with 40% talc. Exhibits good molding and good surface appearance properties. Propak 1236 is suitable... view more