Makrolon® 3208 by Covestro is a high viscosity, polycarbonate (PC) grade. It is suitable for EtO and steam sterilization at 121°C. It exhibits easy release, high heat resistance, good toughness, good... view more

Makrolon® WB1239 by Covestro is a high viscosity, branched polycarbonate (PC) grade. It is processed by injection stretch blow molding and extrusion blow molding. Makrolon® WB1239 is used in food contact... view more

Akulon® S223-G6-FC BK00001 by Envalior is a polyamide 66 (nylon 66) food contact quality grade reinforced with 30% glass fiber. It offers good chemical resistance and high flowability. It offers an excellent... view more

Akulon® S223-G6-FC NA99001 by Envalior is a polyamide 66 (nylon 66) food contact quality resin reinforced with 30% glass fiber. It exhibits chemical resistance and high flowability. It shows excellent balance of... view more

EcoPaXX® Q-DWX6 by Envalior is a bio-based, long-chain aliphatic polyamide 4-10 (PA 4-10) grade reinforced with 30% glass fiber. It possesses excellent surface properties and very high melting point. It... view more

ForTii® Ace WX51-FC by Envalior is a 30% glass-reinforced polyphthalamide (PA4T), food contact quality, drinking water grade. It shows good high-temperature and wet mechanical performance. ForTii® Ace WX51-FC... view more

ForTii® Ace WX53-FC by Envalior is a 50% glass-reinforced, chemical-resistant, polyphthalamide (PA4T). It shows good high-temperature and wet mechanical performance. It exhibits weldline strength and... view more

InElec™ PEASFC by Americhem is a permanently antistatic polyethylene (PE) grade. Is electrically active and provides electrostatic discharge. Suitable for processing by injection molding. Possible... view more

ORGASOL® 2001 UD NAT 2 by Arkema is a polyamide 12 (PA 12) ultrafine powder with narrow particle size distribution. It can rigorously control particle size distribution and provides excellent... view more

ORGASOL® 2002 EXD NAT 1 by Arkema is a spheroidal powder of polyamide 12 (PA 12) with narrow particle size distribution. It can rigorously control particle size distribution and provides excellent... view more

Rilsan® BESVO A FDA by Arkema is a food contact approved, lubricated polyamide 11 (PA 11/Nylon 11) resin with renewable resource content. It contains a negligible amount of oligomers. This grade is... view more

Rilsan® D30 NATURAL by Arkema is polyamide 11 (PA 11) grade obtained from renewable resources with an average diameter of 21-27µm. Provides excellent scratch and abrasion resistance. Offers good... view more

Rilsan® D40 NATURAL by Arkema is polyamide 11 (PA 11) grade. It is obtained from renewable resources with an average diameter of 27-31µm. Offers good dispersion capacity, reduced impact on rheology... view more

Vydyne® 50BW by Ascend Performance Materials is a natural colored, general purpose polyamide 66 grade with good color retention and stability. It exhibits good chemical, gasoline, oil and solvent resistance. It is... view more

4410 by Asia International Enterprise (AIE) is a general purpose, air-tight polystyrene high impact (HIPS) grade. Exhibits high impact resistance, low water absorption, easy processability, colorability, paintability... view more

ST5010 is a super tough, low temperature- and impact resistant polyamide 6 (PA-6) grade by Asia International Enterprise. Exhibits high mechanical strength, high softening point, self-lubrication... view more