Makrolon® 3208 by Covestro is a high viscosity, polycarbonate (PC) grade. It is suitable for EtO and steam sterilization at 121°C. It exhibits easy release, high heat resistance, good toughness, good... view more

Makrolon® WB1239 by Covestro is a high viscosity, branched polycarbonate (PC) grade. It is processed by injection stretch blow molding and extrusion blow molding. Makrolon® WB1239 is used in food contact... view more

Akulon® S223-G6-FC BK00001 by Envalior is a polyamide 66 (nylon 66) food contact quality grade reinforced with 30% glass fiber. It offers good chemical resistance and high flowability. It offers an excellent... view more

Akulon® S223-G6-FC NA99001 by Envalior is a polyamide 66 (nylon 66) food contact quality resin reinforced with 30% glass fiber. It exhibits chemical resistance and high flowability. It shows excellent balance of... view more

EcoPaXX® Q-DWX6 by Envalior is a bio-based, long-chain aliphatic polyamide 4-10 (PA 4-10) grade reinforced with 30% glass fiber. It possesses excellent surface properties and very high melting point. It... view more

ForTii® Ace WX51-FC by Envalior is a 30% glass-reinforced polyphthalamide (PA4T), food contact quality, drinking water grade. It shows good high-temperature and wet mechanical performance. ForTii® Ace WX51-FC... view more

ForTii® Ace WX53-FC by Envalior is a 50% glass-reinforced, chemical-resistant, polyphthalamide (PA4T). It shows good high-temperature and wet mechanical performance. It exhibits weldline strength and... view more

NORYL™ Resin FE1630PW (Asia) by SABIC is a 30% glass fiber reinforced, heat stabilized blend of polyphenylene ether (PPE) and crystal clear polystyrene (ccPS). It shows low creep sensitivity... view more

InElec™ PEASFC by Americhem is a permanently antistatic polyethylene (PE) grade. Is electrically active and provides electrostatic discharge. Suitable for processing by injection molding. Possible... view more

Rilsan® BESVO A FDA by Arkema is a food contact approved, lubricated polyamide 11 (PA 11/Nylon 11) resin with renewable resource content. It contains a negligible amount of oligomers. This grade is... view more

Rilsan® D30 NATURAL by Arkema is polyamide 11 (PA 11) grade obtained from renewable resources with an average diameter of 21-27µm. Provides excellent scratch and abrasion resistance. Offers good... view more

Rilsan® D40 NATURAL by Arkema is polyamide 11 (PA 11) grade. It is obtained from renewable resources with an average diameter of 27-31µm. Offers good dispersion capacity, reduced impact on rheology... view more

Rilsan® D50 NATURAL by Arkema is a high performance polyamide 11 (PA 11) fine powder obtained from renewable resources with an average diameter of 40-46µm. Provides excellent scratch and abrasion... view more

Rilsan® D60 NATURAL is a high performance polyamide 11 (PA 11) grade obtained from renewable resources by Arkema. It is fine powder with an average diameter of 43-55µm. Provides excellent scratch... view more

150 by Asia International Enterprise is a semi-transparent, unmodified polyether imide (PEI) grade. Exhibits high rigidity. Offers excellent thermal resistance, broad chemical resistance, inherent... view more

150C6-WR by Asia International Enterprise (AIE) is a polyether imide (PEI) grade reinforced with 30 % carbon fiber. Exhibits high rigidity and high abrasion resistance. Offers excellent thermal resistance, broad chemical... view more

150G6-WR by Asia International Enterprise is a polyether imide (PEI) grade reinforced with 30 % glass fiber. Exhibits high rigidity and high abrasion resistance. Offers excellent thermal resistance... view more

350 by Asia International Enterprise is an unmodified liquid crystal polymer (LCP) grade. Exhibits high temperature resistance, high flow, excellent mechanical and electrical properties. Offers good... view more