SLOVALEN PH 72 T 40 is a heat stabilized polypropylene homopolymer reinforced with 40% mineral filler. Possesses process stabilization. Suitable for processing by injection molding process... view more

SLOVAMID®6 BT TS is an optically brightened, heat stabilized polyamide 6 (PA6) grade. Exhibits high toughness, high modulus of elasticity in tension in comparison with basic types and surface... view more

SLOVAMID® 6 GF 10 GB 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20 % glass beads. Exhibits good moldability and strength. Suitable for processing by... view more

SLOVAMID® 6 GF 10 T 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20% talc. Exhibits good anisotropy of the manufacturing shrinkage and low warpage after... view more

SLOVAMID® 6 GF 15 HI TS is a heat stabilized, impact modified polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of... view more

SLOVAMID® 6 GF 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers. Suitable for processing by injection molding. Recommended for manufacture of grips for electro... view more

SLOVAMID® 6 GF 25 T 15 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with glass and mineral fibers. Exhibits improved anisotrophy of shinkage. Suitable for processing by injection... view more

SLOVAMID® 6 GF 30 TS by Plastcom is a heat stabilized polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high heat resistance. Suitable for processing by injection molding. Recommended for... view more

SLOVAMID® 6 M 40 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 40% mineral fibers. Exhibits high strength, high rigidity and allows thermal application up to 100°C. Possesses... view more

SLOVAMID® 6 NG GF 30 TS by Plastcom is an heat stabilized polyamide 6 (PA6) grade reinforced with 30% glass fibers. Exhibits high impact strength. Suitable for processing by injection molding. SLOVAMID® 6 NG GF 30 TS is... view more

SLOVAMID® 6/66 FRC 3 TS is a flame retarded, heat stabilized polyamide 6/66 (PA 6/66) grade with non-halogen flame retardant. Suitable for processing by injection molding. Used in electrical... view more

SLOVAMID® 6/66 GF 30 FRG 5 TS is a flame retarded, heat stabilized polyamide 6/66 (PA6/66) grade reinforced with 30% glass fibers. The grade is with non-halogen flame retardant. Exhibits high flow... view more

SLOVAMID® 6/66 GF 30 TS is a heat stabilized polyamide 6 + polyamide 66 (PA6+PA66) grade reinforced with 30% glass fibers. Suitable for processing by injection molding. Used in automotive... view more

SLOVAMID® 66 FRC 3 TS is a flame retarded, heat stabilized polyamide 66 (PA66) grade. Possesses good brightness. Suitable for processing by injection molding. Recommended for manufacturing of... view more

SLOVAMID® 66 FRX3 7 TS is a flame retarded, heat stabilised polyamide 66 (PA66) grade with non-halogen flame retardant. Suitable for processing by injection molding. Used in electrical industry for... view more

SLOVAMID® 66 GF 10 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of hobby tools... view more

SLOVAMID® 66 GF 15 GB 25 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 15% glass fibers and 25% glass beads. Exhibits anisotropy of shrinkage, high surface brightness and low... view more

SLOVAMID® 66 GF 15 T 6 TS is a heat stabilized polyamide 66 (PA66) grade reinforced with 15% glass fibers and 6% mineral fibers. Exhibits high strength and toughness also at low temperature... view more

SLOVAMID® 66 GF 25 FRI 3 TS is a heat stabilized, flame retarded with non-halogen flame retardant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Suitable for processing by injection... view more

SLOVAMID® 66 GF 25 HTS is a heat stabilized, hydrolysis resistant polyamide 66 (PA66) grade reinforced with 25% glass fibers. Suitable for processing by injection molding. Recommended for... view more