SLOVAMID® 6 BT HV TLS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding and extrusion methods. SLOVAMID® 6 BT HV TLS is recommended for... view more

SLOVAMID® 6 BT TLS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 BT TLS is recommended for sports equipment and... view more

SLOVAMID®6 BT TS is an optically brightened, heat stabilized polyamide 6 (PA6) grade. Exhibits high toughness, high modulus of elasticity in tension in comparison with basic types and surface... view more

SLOVAMID® 6 FRC 2 TS by Plastcom is a flame retardant, heat stabilized polyamide 6 (PA 6 / Nylon 6) grade. Designed for injection molding method. SLOVAMID® 6 FRC 2 TS is recommended for electrical... view more

SLOVAMID® 6 GB 30 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass bead. Designed for injection molding method. SLOVAMID® 6 GB 30 TS is complies with... view more

SLOVAMID® 6 GF 10 GB 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20 % glass beads. Exhibits good moldability and strength. Suitable for processing by... view more

SLOVAMID® 6 GF 10 T 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20% talc. Exhibits good anisotropy of the manufacturing shrinkage and low warpage after... view more

SLOVAMID® 6 GF 10 T 20 TS 002 by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc and glass fiber and offering low warpage. Designed for injection molding... view more

SLOVAMID® 6 GF 10 T 20 TS 002/AKT by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc and glass fiber and offering low warpage. Designed for injection... view more

SLOVAMID® 6 GF 10 T 20 TS 031/4M by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% talc and glass fiber and offering low warpage. Designed for injection... view more

SLOVAMID® 6 GF 10 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 10% glass fiber. Designed for injection molding method. SLO SLOVAMID® 6 GF 10 TS is... view more

SLOVAMID® 6 GF 15 HI TS is a heat stabilized, impact modified polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of... view more

SLOVAMID® 6 GF 15 T 25 LTS by Plastcom is a heat- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 40% talc and glass fiber. Designed for injection molding method. SLOVAMID® 6... view more

SLOVAMID® 6 GF 15 T 25 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 40% talc and glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 15 T 25... view more

SLOVAMID® 6 GF 15 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 15% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 15 TS is recommended... view more

SLOVAMID® 6 GF 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 20% glass fibers. Suitable for processing by injection molding. Recommended for manufacture of grips for electro... view more

SLOVAMID® 6 GF 25 LTS by Plastcom is a heat- , light- and UV stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 25... view more

SLOVAMID® 6 GF 25 T 15 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with glass and mineral fibers. Exhibits improved anisotrophy of shinkage. Suitable for processing by injection... view more

SLOVAMID® 6 GF 25 TS by Plastcom is a heat stabilized polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 25% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 25 TS is recommended... view more

SLOVAMID® 6 GF 30 HTS by Plastcom is a heat- and hydrolytically stable polyamide 6 (PA 6 / Nylon 6) grade, reinforced with 30% glass fiber. Designed for injection molding method. SLOVAMID® 6 GF 30... view more