SLOVAMID® 6 BT is a polyamide 6 (PA6) grade. Exhibits excellent manufacturing properties. Suitable for processing by injection molding. Recommended for engineering, electrical and consumer-goods... view more

SLOVAMID®6 BT TS is an optically brightened, heat stabilized polyamide 6 (PA6) grade. Exhibits high toughness, high modulus of elasticity in tension in comparison with basic types and surface... view more

SLOVAMID® 6 C 30 LS is a UV stabilized polyamide 6 (PA6) grade reinforced with 30% calcium carbonate. Exhibits increased strength, high rigidity and thermal application up to 100°C. Possesses... view more

SLOVAMID® 6 CF 20 is a polyamide 6 (PA6) grade reinforced with 20% carbon fibers. Exhibits high strength and toughness also at low temperature. Suitable for processing by injection molding... view more

SLOVAMID® 6 FRB 4 by Plastcom is a halogen-free, flame retardant polyamide 6 (PA6) grade. Exhibits easy flowability, good resistance against injection failure and good fluidity. Suitable for processing by... view more

SLOVAMID® 6 FRC 2 by Plastcom is a halogen free, flame retardant polyamide 6 (PA6) grade. Suitable for processing by injection molding. Excellent fluidity of the material predetermines it for the... view more

SLOVAMID® 6 FRC 2 LI is an impact modified, flame retarded polyamide 6 (PA6) grade with halogen-free flame retardant. Excellent fluidity of the material predetermines it for the manufacturing of... view more

SLOVAMID® 6 FRC 2 LS is an UV stabilized, halogen-free, flame retartdant polyamide 6 (PA6) grade. Allows long-term external use because of stabilization with the light stabilizers on the HALS basis... view more

SLOVAMID® 6 FRM 1 is a halogen free, flame retardant polyamide 6 (PA6) grade. Suitable for processing by injection molding. Excellent fluidity of the material predetermines it for the manufacturing... view more

SLOVAMID® 6 G 10is a polyamide 6 (PA6) grade reinforced with 10% graphite. Exhibits lowered molding surface abrasion. Suitable for processing by injection molding. Recommended for manufacturing of... view more

SLOVAMID® 6 G 5 is a polyamide 6 (PA6) grade reinforced with 5% graphite. Exhibits lowered molding surface abrasion. Suitable for processing by injection molding. Recommended for manufacturing of... view more

SLOVAMID® 6 GB 20 is a polyamide 6 (PA6) grade reinforced with 20% glass beads. Exhibits high surface brightness, good moldability and good anisotropy of molding. Suitable for processing by... view more

SLOVAMID® 6 GB 30 is a polyamide 6 (PA6) grade reinforced with 30% glass beads. Exhibits high surface brightness, good moldability and nearly ideal anisotropy of shrinkage in the vertical and in the... view more

SLOVAMID® 6 GF 10 is a polyamide 6 (PA6) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for electro tools, hobby tools... view more

SLOVAMID® 6 GF 10 FRC 2 is a flame retardant polyamide 6 (PA6) grade reinforced with 10% glass fibers. Suitable for processing by injection molding. Recommended for manufacturing of grips for... view more

SLOVAMID® 6 GF 10 GB 20 is a polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20% glass beads. Suitable for processing by injection molding. Recommended for manufacturing of grips for... view more

SLOVAMID® 6 GF 10 GB 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20 % glass beads. Exhibits good moldability and strength. Suitable for processing by... view more

SLOVAMID® 6 GF 10 T 20 TS is a heat stabilized polyamide 6 (PA6) grade reinforced with 10% glass fibers and 20% talc. Exhibits good anisotropy of the manufacturing shrinkage and low warpage after... view more

SLOVAMID® 6 GF 15 is a polyamide 6 (PA6) grade reinforced with 15% glass fibers. Exhibits good impact resistance and impact strength. Suitable for processing by injection molding. Recommended for... view more

SLOVAMID® 6 GF 15 FRA 5 is a halogen-free, flame retardant polyamide 6 (PA6) grade reinforced with 15% glass fibers. Suitable for processing by injection molding. Recommended for electrical... view more