Arnitel® ID2060-HT by Envalior is a 100% recyclable, high performance, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

CastForm™ PS by 3D Systems is a recyclable polystyrene (PS) expendable pattern casting material. Is compatible with standard foundry practices, and offers low residual ash content (less than 0.02... view more

PA 2241 FR by 3T Additive Manufacturing is a halogen-based flame retardant containing polyamide 12 grade used to produce parts made by plastic Additive Manufacturing (AM). Is suitable for processing... view more

ALM PA 250-C is a white colored, water insoluble, highly recyclable specialty nylon 12 composite grade present as powder. It is engineered for excellent mechanical properties, part definition and... view more

ALM PA 415-GS is a nylon (PA (polyamide) 12) grade filled with 40% glass spheres. Exhibits good mechanical properties and surface finish. Stabilized against thermal degradation. Shows reduction in... view more

ALM PA 605-A is a nylon (PA (polyamide) 12) grade filled with 50% aluminum. Exhibits good machinability, improved heat transfer, good dimensional stability and pleasant gray metallic part... view more

ALM PA 860 is a white colored, water insoluble, recyclable nylon (PA (polyamide) 12) grade filled with 40% glass. Exhibits optimized flow, improved dimensional stability and increased stiffness... view more

ALM PA 615-GS is a white colored, water insoluble, recyclable nylon (PA (polyamide) 12) grade filled with 50% glass. Exhibits optimized flow, improved dimensional stability and increased stiffness... view more

ORGASOL® Invent Smooth is a low density polyamide (PA) powder with a micro-porosity (1 to 20 m²/g). Is easily recyclable and exhibits outstanding viscosity stability, excellent contour resolution... view more

Adsint PP Flex by BASF is a polypropylene grade. It is developed for selective laser sintering (SLS) process. Exhibits excellent plasticity, high elongation of 29%, low moisture absorption and... view more

Adsint TPU 80 shA by BASF is a 100% recyclable thermoplastic polyurethane (TPU) grade. Exhibits smooth surface and very high elongation at break. Offers good abrasion & chemical resistance, process... view more

Ultrafuse PET (Old Name: Innofil3D EPR InnoPET) by BASF 3D Printing Solutions is amorphous polyethylene terephthalate based filament for fused filament fabrication. It exhibits large operating... view more

PP 400 by Braskem is a polypropylene (PP) powder with excellent mechanical properties and dimensional stability. It offers a balance of strength and impact resistance. Exhibits high chemical... view more

CiaoPlas™ PLA212 NAT by Chiao Fu Material Technology (Chiao Fu Group) is a PLA (polylactic acid) grade. It is a cost effective, natural colored product derived from natural, renewable, non-toxic... view more

PA 2241FR is a recyclable, halogenated, flame retardant polyamide 12 (PA 12) homopolymer grade. Exhibits high strain at tensile strength, high crystallinity, good thermal stability, and resistance... view more

INFINAM® PA12 by Evonik is a new sustainable grade of PA-12 powder with significantly reduced carbon dioxide emissions for powder bed fusion 3D printing technologies. It exhibits excellent chemical... view more