Accura® Bluestone™ Plastic by 3D Systems is a high rigidity, engineered nanocomposite 3D printing/ prototyping plastic resin. Is a SLA (Stereolithography) prototyping polymer and is designed for... view more

Accura® ClearVue™ Material by 3D Systems is a general purpose 3D printing/ prototyping plastic resin to simulate the properties and appearance of polycarbonate (PC) and acrylonitrile butadiene... view more

DuraForm® FR 100 Plastic by 3D Systems is a halogen-free, flame retardant printing/ prototyping plastic resin which is antimony free. Is a sintering prototyping polymer and is designed for injection... view more

3M™ Dyneon™ Fluoroelastomer FC 2123 by 3M-Dyneon is a low viscosity fluoroelastomer containing 65.9% fluorine. It is a di-polymer of vinylidene fluoride and hexafluoropropylene. It is soluble in... view more

3M™ Dyneon™ Fluoroelastomer FC 2145 by 3M-Dyneon is amine or bisphenol curable, low viscosity gum fluoroelastomer. It contains 65.9% fluorine. It is a di-polymer of vinylidene fluoride and... view more

3M™ Dyneon™ Fluoroelastomer FC 2211 by 3M-Dyneon is an amine or bisphenol curable, ultra-low viscosity fluor elastomer. It contains 65.9% fluorine & is soluble in ketones and esters. It is a... view more

3M™ Dyneon™ Fluoroelastomer FT 2320 by 3M-Dyneon is a low viscosity fluoroelastomer containing 69.0% fluorine. It is a terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene... view more

DAI-EL™ G-7251 by Daikin is a general purpose, bisphenol cured, high performance fluorinated hydrocarbon rubber (FKM) copolymer grade. Exhibits excellent mold flow. Offers excellent heat resistance... view more

DAI-EL™ G-7261 by Daikin is a bisphenol cured, high performance fluorinated hydrocarbon rubber (FKM) copolymer grade. Exhibits low compression set. Offers excellent heat resistance, good low... view more

DAI-EL™ G-7262 by Daikin is a bisphenol cured, high performance fluorinated hydrocarbon rubber (FKM) copolymer grade. Offers excellent heat resistance, good low temperature resistance, good... view more

DAI-EL™ G-8002 by Daikin is a peroxide cured, high performance fluorinated hydrocarbon rubber (FKM) copolymer grade. Exhibits excellent mold flow and flex fatigue resistance. Offers excellent heat... view more

DAI-EL™ G-802 by Daikin is a peroxide cured, high performance fluorinated hydrocarbon rubber (FKM) copolymer grade. Exhibits good water resistance. Offers excellent heat resistance, good low... view more

BLUESIL™ RTV 3428 A/B by Elkem Silicones is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. It is used in... view more

DAPOL® D500 by Fudow (a group company of Mitsubishi Gas Chemical) is a di-allyl phthalate thermoset resin. Shows excellent humidity resistance, electrical insulation, tracking resistance... view more

BMC HT12 by LyondellBasell is an unsaturated polyester composite grade, reinforced with glass fiber and mineral filler. Exhibits high compressive strength, and shows resistance to oil, solvent &... view more

Silopren™ LSR 2030 by Momentive Performance Materials is a general purpose, two-component liquid silicone rubber (LSR). It is a crosslinkable, platinum cured resin available as 1:1 ratio by weight... view more

Silopren™ LSR 2040 RSH by Momentive Performance Materials is a platinum cured liquid silicone rubber (LSR). It is a crosslinking, two-component resin with a lower impact on the environment. Offers... view more