Edgetek™ ET3300-0030 RS White is a white colored, heat resistant, semi-crystalline, chemically resistant polybutylene terephthalate [PBT] grade reinforced with glass fiber. Enables significantly low... view more

Edgetek™ NL-20GF/000 Black by PolyOne is a semi-crystalline, 20% glass fiber filled polyamide 6-12 (PA 6-12) grade. It exhibits very good chemical resistance, good stability and low to none water... view more

Edgetek™ PS-15GF/000 White is a white colored, heat resistant, semi-crystalline, chemical resistant polybutylene terephthalate [PBT] grade reinforced with 15% glass fiber. Enables significantly low... view more

Edgetek™ PS-20GF/000 NATURAL by Avient (Formerly PolyOne) is a semi-crystalline, chemically resistant, polybutylene terephthalate grade reinforced with 20% glass fiber. It offers high heat resistance. Edgetek™ PS-20GF/000 NATURAL is used in appliance... view more

LubriOne™ PS-30GF/2S Natural by PolyOne is a semi-crystalline, lubricated polybutylene terephthalate (PBT) grade. It exhibits excellent chemical resistance, high heat resistance and high rigidity... view more

KEBAFLEX P D72.1 by Barlog Plastics is a flexible, semi-crystalline, polyester elastomer. It exhibits good gliding properties, good recovery behavior and high wear resistance. This grade is used in axle... view more

KEBAFLEX SG 60 A.01 black by Barlog Plastics is a flexible, soft & semi-crystalline, thermoplastic elastomer (TPE-S). This grade is processed by injection molding. It displays good haptics. KEBAFLEX SG 60 A.01 black by Barlog Plastics is... view more

KEBAFLEX U A 75 ST B01 natural by Barlog Plastics is a polyester thermoplastic polyurethane (TPU). It shows high resistance to oils & greases, very good damping & recovery behavior and high temperature & wear resistance... view more

KEBAFORM C 1090 by Barlog Plastics is a medium viscosity, polyoxymethylene (POM) copolymer reinforced with 10% glass fiber. This semi-crystalline grade exhibits dimensional stability, good chemical resistance... view more

KEBAFORM C 130.2 by Barlog Plastics is an unreinforced, medium viscosity, polyoxymethylene (POM) copolymer. This semi-crystalline grade exhibits dimensional stability, good chemical resistance and good gliding... view more

Grivory® G4V-5H Natural by EMS-Grivory (EMS Group) is a water-insoluble thermoplastic material based on a semi-crystalline partially aromatic copolyamide reinforced with 50% glass fiber. It is... view more

Grivory® GCL-3H anthracite is an anti-static, partially aromatic polyamide 66/6 (PA 66 + 6) grade reinforced with 30% long carbon fibers (aligned parallel, as long as the pellets ~10 mm). Is based... view more