PTS PCA-1010HF by Amco Polymers is a high flow polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) alloy. Exhibits low temperature impact resistance, heat distortion resistance and chemical... view more

PTS PCA-1011 by Amco Polymers is a high impact alloy of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) resin. Exhibits heat distortion resistance and chemical stress resistance... view more

PTS PCA-1012 by Amco Polymers is a high impact alloy of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) resin. Exhibits heat distortion resistance (superior to ABS, less than PC) and... view more

PTS PCA-2010NH by Amco Polymers is a halogen-free, non-bromine, non-chlorine flame retardant alloy of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS). Exhibits heat distortion... view more

PTS PCA-2010NHV by Amco Polymers is a non-brominated, non-chlorinated, UV-stabilized and halogen free flame retardant polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) alloy. Exhibits... view more

Ultramid® HPN 9362 is an impact modified PA6 grade resin reinforced with 40% mineral fiber. Possesses good elastic properties, high dimensional stability, low tendency to creep and excellent sliding... view more

Terblend® N NM-19 is a U.V. stabilized acrylonitrile butadiene styrene and polyamide (ABS/PA) blend. Possesses good surface finish, high impact strength and toughness. Exhibits high melt flow, good... view more

Terblend® N NM-19XP is a U.V. stabilized acrylonitrile butadiene styrene and polyamide (ABS/PA) blend. Possesses good surface finish, high impact strength and toughness. Exhibits good flowability... view more

KEPAMID® 1320M7 is a Polyamide 6 (PA6) grade reinforced with 20% mineral fibers. Offers thermal properties with long term heat resistance between 80°C and 140°C. Possesses strong mechanical... view more

KEPAMID® 1325M7 is a Polyamide 6 (PA6) grade reinforced with 25% mineral fibers. Offers thermal properties with long term heat resistance between 80°C and 140°C. Possesses strong mechanical... view more

KEPAMID® 1330M7 is a Polyamide 6 (PA6) grade reinforced with 30% mineral fibers. Offers thermal properties with long term heat resistance between 80°C and 140°C. Possesses strong mechanical... view more

KEPAMID® 1340GM8 by KEP is a Polyamide 6 (PA6) grade reinforced with glass-, 40% mineral fibers. Offers thermal properties with long term heat resistance between 80°C and 140°C. Possesses strong... view more

Lemalloy® BX505 is a polyphenylene ether and polyamide 6 (PPE+PA6) grade. Exhibits high rigidity, high impact strength and good dimensional stability, good fatigue resistance and good insulation... view more

Lemalloy® BX528A-3 is a polyphenylene ether and polyamide 6 (PPE+PA6) grade. Exhibits high rigidity, high impact strength and good dimensional stability, good fatigue resistance and good insulation... view more

POLIFOR® E 10 CA/37 GRIGIO 7680 AC320089S is a grey colored, elastomer modified polypropylene grade filled with 30% mineral (calcium carbonate). Exhibits high stiffness & abrasion resistance, low... view more

ZF-T20 is a polypropylene PP grade reinforced with 20 % mineral. Possesses good mechanical strength, good surface finish and flowability. Exhibits good processability & heat and aging resistance. Is... view more

ZF-T30 is a polypropylene PP grade reinforced with 30 % mineral. Possesses good mechanical strength, good surface finish and flowability. Exhibits good processability & impact and aging resistance... view more

ZF-T40 is a polypropylene PP grade reinforced with 40 % mineral. Possesses good mechanical & dielectric strength, good surface finish and flowability. Exhibits good processability & heat and... view more