Desmopan® 445 by Covestro is an ester-based thermoplastic polyurethane (TPU) block copolymer grade with low compression set. It exhibits good heat-, oil- and grease resistance. It is suitable for... view more

Desmopan® 460 by Covestro is a heat resistant, ester based thermoplastic polyurethane (TPU) block copolymer grade with short cycle times. It exhibits low compression set, high elasticity, oil- and... view more

Desmopan® 481 by Covestro is low compression set, ester based thermoplastic polyurethane (TPU) block copolymer grade with good heat resistance. It is free from plasticizers and exhibits easy release... view more

Arnitel® HT7719 by Envalior is a non-reinforced & non flame retarded, high performance, heat resistant, thermoplastic copolyester. It shows chemical resistance. It is a lighter, smarter, greener... view more

Arnitel® HT8027 by Envalior is a heat resistant, high performance, thermoplastic copolyester (COPE) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

EcoPaXX® Q150-D by Envalior is a bio-based, high-performance, low/medium viscosity, long aliphatic polyamide (PA410) based on castor oil. It offers low moisture uptake, good dimensional stability and... view more

Stanyl® TS250FK33 by Envalior is a flame-retarded, low warpage, polyamide 4-6 (PA 4-6) grade, reinforced with 30% glass and mineral fiber. It is suitable for processing by injection molding. It provides... view more

Stanyl® TW271F6J10 by Envalior is a heat-stabilized, chemical-resistant, high-performance polyamide 4-6 (PA 4-6) + PTFE grade reinforced with 30% glass fiber. It provides unmatched performance and value... view more

LNP™ COLORCOMP™ Compound NX06514 by SABIC is an unfilled, PFAS-free polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) resin. This injection moldable grade contains non-chlorinated & non-brominated flame... view more

TRIMID® N66100 (Old Name: TRIMID® N66-1010) by Amco Polymers is a crystalline polyamide 66 (nylon 66) grade. Exhibits excellent wear-, chemical-, thermal- and heat resistance. Offers high mold... view more

Leona™ TR161 by Asahi Kasei is an impact modified, heat stabilized polyamide 66 (PA 66) grade. It offers medium impact resistance, excellent heat and oil resistance. It exhibits excellent toughness... view more

Bergamid™ B70 U Grey 7035 by Avient (Formerly PolyOne) is a general purpose, medium viscosity, halogen-free flame retarded polyamide 6 (PA 6). It offers good heat resistance, impact resistance... view more

Nymax™ GF 1200 A 55 HS Natural by Avient (Formerly PolyOne) is a heat stabilized, 55% glass fiber reinforced polyamide 66 (PA 66). It is processed by injection molding. It offers easy processing... view more

Rynite® 415HP BK503 by DuPont is a high gloss, toughened polyethylene terephthalate (PET) grade reinforced with 15% glass. Exhibits excellent balance of strength and stiffness, good dimensional... view more

Rynite® 415HP NC010 by DuPont is a high gloss, 15% glass reinforced polyethylene terephthalate (PET) grade. Exhibits excellent impact resistance and good mold release. It is suitable for processing... view more

Rynite® 530HTE NC010 by DuPont is a heat resistant, high flow polyethylene terephthalate (PET) grade reinforced with 30% glass. Possesses good inherent electrical properties at an elevated... view more

Zytel® PLUS PLS95G35DH1 BK549 by Celanese is a high flow, heat stabilized polyamide (PA) grade reinforced with 35% glass fiber. Exhibits good mold release, easy processability, excellent chemical-, heat-, calcium... view more

Zytel® PLUS PLS95G35DH1 NC010 by Celanese is a high flow, heat stabilized, DuPont™ SHIELD protected polyamide (PA) grade reinforced with 35% glass fiber. It contains a release agent. Exhibits good mold release, easy... view more

CEVIAN® SERG1 is a flame retardant UL94 V-0 acrylonitrile butadiene styrene (ABS) grade reinforced with 10 % glass fiber. Possesses rigidity, good transparency and offers easy processability... view more

CEVIAN-V® 460M is an acrylonitrile butadiene styrene ABS grade. Possesses rigidity, good transparency and offers easy processability. Exhibits good flowability & heat-, impact and chemical... view more