Desmopan® 445 by Covestro is an ester-based thermoplastic polyurethane (TPU) block copolymer grade with low compression set. It exhibits good heat-, oil- and grease resistance. It is suitable for... view more

Desmopan® 460 by Covestro is a heat resistant, ester based thermoplastic polyurethane (TPU) block copolymer grade with short cycle times. It exhibits low compression set, high elasticity, oil- and... view more

Desmopan® 481 by Covestro is low compression set, ester based thermoplastic polyurethane (TPU) block copolymer grade with good heat resistance. It is free from plasticizers and exhibits easy release... view more

Arnitel® HT7719 by Envalior is a non-reinforced & non flame retarded, high performance, heat resistant, thermoplastic copolyester. It shows chemical resistance. It is a lighter, smarter, greener... view more

Arnitel® HT8027 by Envalior is a heat resistant, high performance, thermoplastic copolyester (COPE) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

EcoPaXX® Q150-D by Envalior is a bio-based, high-performance, low/medium viscosity, long aliphatic polyamide (PA410) based on castor oil. It offers low moisture uptake, good dimensional stability and... view more

Stanyl® TS250FK33 by Envalior is a flame-retarded, low warpage, polyamide 4-6 (PA 4-6) grade, reinforced with 30% glass and mineral fiber. It is suitable for processing by injection molding. It provides... view more

Stanyl® TW271F6J10 by Envalior is a heat-stabilized, chemical-resistant, high-performance polyamide 4-6 (PA 4-6) + PTFE grade reinforced with 30% glass fiber. It provides unmatched performance and value... view more

LNP™ COLORCOMP™ Compound NX06514 by SABIC is an unfilled, PFAS-free polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) resin. This injection moldable grade contains non-chlorinated & non-brominated flame... view more

TRILAC® ABS-GF3000-BK by Amco Polymers is a black colored polyacrylonitrile butadiene styrene (ABS) resin reinforced with 30% glass fiber. Exhibits fair heat- and chemical resistance. Possesses good... view more

TRIMID® N66100 (Old Name: TRIMID® N66-1010) by Amco Polymers is a crystalline polyamide 66 (nylon 66) grade. Exhibits excellent wear-, chemical-, thermal- and heat resistance. Offers high mold... view more

Leona™ TR161 by Asahi Kasei is an impact modified, heat stabilized polyamide 66 (PA 66) grade. It offers medium impact resistance, excellent heat and oil resistance. It exhibits excellent toughness... view more

095Cx-WR by Asia International Enterprise (AIE) is a polyetheretherketone (PEEK) grade reinforced with carbon fiber. The carbon fiber content ranges from 10% (095C2-WR), 20% (095C4-WR), 30% (095C6-WR) and 40% (095C8-WR)... view more

095Gx by Asia International Enterprise (AIE) is a polyetheretherketone (PEEK) grade reinforced with glass fiber. It ranges from 10% (095G2), 20% (095G4), 30% (095G6) and 40% (095G8). Exhibits high temperature... view more

150 by Asia International Enterprise is a semi-transparent, unmodified polyether imide (PEI) grade. Exhibits high rigidity. Offers excellent thermal resistance, broad chemical resistance, inherent... view more

150Gx by Asia International Enterprise is a polyether imide (PEI) grade reinforced with glass fiber. The glass fiber content ranges from 10% (150G2), 20% (150G4), 30% (150G6) and 40% (150G8)... view more

9010-GFxx by Asia International Enterprise is a polyphenylene oxide (PPO) grade reinforced with glass fiber. The glass fiber content ranges from 10% (9010-GF10), 15% (9010-GF15) and 20% (9010-GF20)... view more