OK
The material selection platform
Plastics & Elastomers
The material selection platform
Plastics & Elastomers
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
955 products match your search
Product Name
Supplier
Description
EcoPaXX® Q-DWX6 by Envalior is a bio-based, long-chain aliphatic polyamide 4-10 (PA 4-10) grade reinforced with 30% glass fiber. It possesses excellent surface properties and very high melting point. It... view more
Features
  • Aliphatic
  • Appearance Pleasing Surface
  • Chemical resistance Good
  • Crystalinity High
  • ...
ForTii® Ace WX51-FC by Envalior is a 30% glass-reinforced polyphthalamide (PA4T), food contact quality, drinking water grade. It shows good high-temperature and wet mechanical performance. ForTii® Ace WX51-FC... view more
Features
  • Filled Glass Fiber
  • Food contact approved
ForTii® Ace WX53-FC by Envalior is a 50% glass-reinforced, chemical-resistant, polyphthalamide (PA4T). It shows good high-temperature and wet mechanical performance. It exhibits weldline strength and... view more
Features
  • Chemical resistance Good
  • Filled Glass Fiber
  • Food contact approved
ForTii® WX11-FC by Envalior is a 30% glass-reinforced, drinking water, polyphthalamide grade. This food contact quality is suitable for processing by injection molding. It shows excellent hydrolysis... view more
Features
  • Chemical resistance Good
  • Filled
  • Food contact approved
  • Hydrolysis Resistant
  • ...
ULTEM™ resin MD131A (Americas) by SABIC is a transparent, unreinforced, enhanced flow polyetherimide (PEI) grade. Offers high glass transition temperature (Tg) up to 217°C. It is suitable for... view more
Features
  • Flow High
  • Food contact approved
  • Unfilled
ULTEM™ resin MD131A (Europe) by SABIC is an unreinforced, transparent, enhanced flow polyetherimide (PEI) grade. Offers high glass transition temperature (Tg) up to 217°C. It is suitable for... view more
Features
  • Flow High
  • Food contact approved
  • Unfilled
3M™ Dyneon™ Fluoroelastomer FG 5630Q by 3M-Dyneon is a low viscosity, bisphenol cured fluoroelastomer containing 65.9% fluorine content. It is a dipolymer of hexafluoropropylene and vinylidene... view more
Features
  • Compression Set Low
  • Flow Good
  • Food contact approved
  • Water Resistance High
ArcBiox™ SGF15-f-A2 by ABMcomposite is a UV stabilized, biodegradable, polylactic acid (PLA) polymer which is reinforced with short glass fiber. It offers good flowability, good impact properties... view more
Features
  • Appearance Pleasing Surface
  • Flow Good
  • Filled Glass Fiber
  • Food contact approved
  • ...
ABMcomposite
ArcBiox™ f-A2 by ABMcomposite is a biodegradable, polylactic acid (PLA) polymer which is reinforced with minerals. It is made from 100% renewable resources. It is recommended for automotive... view more
Features
  • Surface Finish Good
  • Biodegradable
  • Renewable Resource Content
  • Dimensional stability Good
  • ...
ABMcomposite
ArcBiox™ f-A2 HF by ABMcomposite is a biodegradable, polylactic acid (PLA) polymer which is reinforced with minerals. It is made from 100% renewable resources. It can be processed by injection... view more
Features
  • Dimensional stability Good
  • Flow Good
  • Filled Mineral
  • Renewable Resource Content
  • ...
Fluon® ETFE AH-700 by AGC is a non-conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, lower melting properties, good processability... view more
Features
  • Barrier Good
  • Chemical resistance Good
  • ESCR High Stress Crack Resist
  • Food contact approved
  • ...
Fluon® ZL-520N by AGC is a melt-processable ethylene tetrafluoroethylene (ETFE) copolymer grade reinforced with 20% carbon fiber. Possesses high toughness, high resistance to heat, weather, aging... view more
Features
  • Chemical resistance Good
  • Copolymer
  • Filled Carbon fiber
  • Food contact approved
  • ...
Alphagary (Orbia)
Sylvin 2993-80 White 1585 by Alphagary (Orbia) is a white colored polyvinyl chloride (PVC) grade. Is suitable for processing by injection molding. Recommended for reflective marker applications. Sylvin 2993-80 White 1585 complies with... view more
Features
  • Food contact approved
InElec™ PEASFC by Americhem is a permanently antistatic polyethylene (PE) grade. Is electrically active and provides electrostatic discharge. Suitable for processing by injection molding. Possible... view more
Features
  • Antistatic
  • Electrical Properties Good
  • Food contact approved
Asahi Kasei
Tuftec™ H1062 by Asahi Kasei is a hydrogenated styrene ethylene butylene styrene copolymer (SEBS) grade. Exhibits strong heat seal- & good mechanical property at low temperature and good... view more
Features
  • Copolymer
  • Food contact approved
  • Heat Seal Good
  • Impact Resistance Good
  • ...
Asahi Kasei
Tuftec™ M1943 by Asahi Kasei is a maleic anhydride modified, hydrogenated styrene ethylene butylene styrene copolymer (SEBS) grade. It is supplied as a dusted, dense pellet. It is an excellent... view more
Features
  • Impact modified
  • Food contact approved
  • Copolymer
Ascend Performance Materials
Vydyne® 21SPM by Ascend Performance Materials is a general-purpose, unfilled, enhanced crystallization temperature polyamide 66 (PA 66) resin with an alternate internal lubricant. It is designed principally to decrease... view more
Features
  • Abrasion resistance Good
  • Chemical resistance Good
  • Cycle Time Short
  • Food contact approved
  • ...
Ascend Performance Materials
Vydyne® 65A NT0751 by Ascend Performance Materials is a medium viscosity, general purpose polyamide 66 (PA 66) resin. It offers heat stability, high strength, rigidity and toughness. It exhibits good resistance to... view more
Features
  • Chemical resistance Good
  • Food contact approved
  • General purpose
  • Heat stabilized
  • ...
Ascend Performance Materials
Vydyne® 67R NT0753 by Ascend Performance Materials is a general purpose, heat stabilized, high melt stability polyamide 66 (PA 66) resin. It offers high strength, viscosity, rigidity, toughness, gasoline-, oil-, solvent- and... view more
Features
  • Chemical resistance Good
  • Food contact approved
  • Gasoline Resistance
  • General purpose
  • ...
Ascend Performance Materials
Vydyne® R513 NAT by Ascend Performance Materials is a general purpose, polyamide 66 (PA 66) grade reinforced with 13% glass fiber. The resin is lubricated for machine feed, flow and mold release... view more
Features
  • Chemical resistance Good
  • Creep Resistance Good
  • Dimensional stability Good
  • Filled Glass Fiber
  • ...
Back to Top