Arnitel® EL740 by Envalior is a high-performance, non-reinforced, non-flame retardant, thermoplastic copolyester (TPC) grade. It is processed by injection molding. It is a lighter, smarter, greener... view more

Arnitel® PL381 by Envalior is a high-performance, non-reinforced & non-flame retardant, thermoplastic copolyester (TPC). It is a lighter, smarter, greener alternative to conventional rubbers thus... view more

Arnitel® VT3104 by Envalior is a high-performance, thermoplastic copolyester (TPC). It is processed by film extrusion. It is a lighter, smarter, greener alternative to conventional rubbers thus... view more

Arnitel® VT3108 by Envalior is a high-performance, highly breathable, thermoplastic copolyester (TPC). This food contact quality is processed by film extrusion and requires drying. It is a lighter... view more

Arnitel® VT3118 by Envalior is a high performance, highly breathable, thermoplastic polyester elastomer. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

3M™ Dyneon™ Fluoroplastic THV 221AZ is a fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. Is an E-beam crosslinkable grade. Processing profile allows... view more

SX-0470:CM424 by AEI Compounds is a flexible, silane crosslinkable polyethylene (XLPE) grade. The graft component SX-0470 is mixed with a crosslinking catalyst masterbatch CM424 or CM493 generally in the... view more

SX-0620:CM601 by AEI Compounds is a halogen free, flame retardant, silane crosslinkable, flexible polyolefin grade. Exhibits oil resistance, confers tough sheathing protection and is curable by... view more

TP-0870 by AEI Compounds is a halogen free, flame retardant, flexible thermoplastic grade. Exhibits low smoke, limited toxic and corrosive fume emission. Is suitable for processing by extrusion... view more

ATLAC® 580 by AOC is an urethane-based, bisphenol-A vinyl ester resin. It can be cured using the cure system including 0.5% NL63-10P, 0.5% NL51P and 1.5% Butanox M-50. Possesses good flexibility... view more

ATLAC® 580 ACT by AOC is a pre-accelerated, thixotropic, urethane-based, bisphenol-A vinyl ester resin. It can be cured using the cure system including Atlac 580, 0.5% NL63-10P, 0.5% NL51P and 1.5%... view more

EPOTEC® YDF 171 by Aditya Birla Chemicals is a general purpose, unmodified diglycidyl ether of bisphenol-F. Offers medium viscosity, better chemical resistance, crystallization resistance and... view more

EPOTEC® YDFM 253 by Aditya Birla Chemicals is a blend of diglycidyl ether of bisphenol-A epoxy resin, diglycidyl ether of bisphenol-F liquid epoxy resin and monofunctional reactive diluent. Offers... view more

Aegis® H55WC is a medium viscosity, heat stabilized, nylon 6 grade. Possesses good toughness & offers good flexibility, processability and good abrasion resistance. Exhibits good chemical resistance... view more

Aegis® H55WCX is a medium viscosity, heat stabilized, nylon 6 grade. Possesses good toughness & offers good flexibility, processability and good abrasion resistance. Exhibits good chemical... view more

Solaplast 1312 is an ethylene vinyl acetate base resin (EVA) with food-grade aquatic biomass and an odor adsorbent. It contains atleast 40% algae biomass content. Offers flexibility, enhanced... view more

GARAFLEX® E 4762 A5 is a 105°C rated, low temperature, lead-free and flexible, unspecified thermoplastic elastomer (TPE) grade. It can be processed by cable extrusion. GARAFLEX® E 4762 A5 is used in... view more

GARAFLEX® E 4771 A8 OR1 by Alphagary is a 105°C rated, flame retardant, flexible, unspecified thermoplastic elastomer (TPE) grade. It provides oil resistance and can be processed by cable extrusion... view more

GARAFLEX® E 4780 A5 by Alphagary is a 105°C rated, flexible, low temperature, unspecified thermoplastic elastomer (TPE) grade. It can be processed by cable extrusion. GARAFLEX® E 4780 A5 is used in... view more