Akulon® SG-KGS6/HV by Envalior is a halogen-free polyamide 66 grade reinforced with 30% glass fiber. It exhibits high flow and is red phosphorous-free. Offers UV resistance for better surface appearance... view more

Arnite® A08 100 by Envalior is polyethylene terephthalate (PET) food contact grade. It exhibits very high viscosity and excellent chemical resistance. Exhibits high strength and rigidity with excellent... view more

Arnitel® CM550-S by Envalior is a high performance, non-reinforced, thermoplastic copolyester grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing environmental... view more

Arnitel® CM620-S by Envalior is an unfilled and flame retardant, high performance, thermoplastic copolyester grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

Arnitel® EL430 by Envalior is an unreinforced & non-flame retardant, high performance, thermoplastic copolyester grade. It possesses high chemical resistance. This grade offers a unique combination of... view more

MasterSil 151Med by Master Bond is a two component, low viscosity, biocompatible silicone compound for high performance potting and encapsulation. It is an addition cured system and does not require... view more

KELTAN® 2470E by ARLANXEO is a crystalline ethylene-propylene rubber. The very low Mooney viscosity and very high level of controlled long chain branching result in excellent processing... view more

BAPOLAN® 6450 by Bamberger Polymers is a white, translucent or offwhite colored, general purpose, high impact polystyrene (HIPS) resin. Exhibits fast cycle times, superior impact and gloss. Is... view more

BB412E by Borealis is an odorless, recyclable, polypropylene (PP) block copolymer. Exhibits medium molecular weight, low melt flow rate, optimal mechanical properties, high stiffness and very good... view more

BC545MO by Borealis is an odorless, recyclable, low-blush, mildly nucleated, polypropylene (PP) heterophasic copolymer. Can be additivated to provide long term heat stability. Exhibits very good... view more

EP 200K by Braskem is a low fluidity heterophasic polypropylene copolymer grade. It does not contain the substance Bisphenol A (BPA, CAS # No. 80-05-7) in its composition. It is insoluble in water... view more

EP 340N by Braskem is a medium fluidity heterophasic polypropylene copolymer grade. It is a translucent/ white solid. Does not contain the substance Bisphenol A (BPA, CAS # No. 80-05-7) in its... view more

GM5010T2U by Braskem is a high molar mass high density polyethylene grade. It is produced with bimodal technology. Shows high mechanical properties and has excellent resistance to stress cracking... view more

PCD 0810 by Braskem is a translucent/ white, high melt flow rate heterophasic polypropylene copolymer grade. Does not contain the substance Bisphenol A (BPA, CAS # No. 80-05-7) in its composition... view more

Teflon™ AF 1600 by Chemours is an amorphous fluoroplastic grade. Available in solid shapes like rods, tubes, bars, and sheet of various thicknesses. Possesses good electrical properties, low thermal... view more

Teflon™ AF 2400 by Chemours is an amorphous fluoropolymer grade. Possesses good electrical properties, low thermal conductivity, good mechanical strength and surface finish. Exhibits high... view more

EPICLON® 1050 by DIC Corporation is a bondable, bisphenol A based epoxy resin. Offers good chemical resistance and two-stage process. It can be used in broad applications including coatings, civil... view more

EPICLON® 1055 by DIC Corporation is a bondable, bisphenol A based epoxy resin. Offers good chemical resistance and one stage process. It can be used in broad applications including coatings, civil... view more

EPICLON® 3050 by DIC Corporation is a bondable, bisphenol A based epoxy resin. Offers good chemical resistance. It can be used in broad applications including civil engineering, adhesives... view more