Texin® RxS292 by Covestro is a biocompatible, aromatic polyester-based thermoplastic polyurethane (TPU) for medical applications. It offers low gel content, good clarity and abrasion resistance. It is... view more

Akulon® Fuel Lock FL40-HPX2 NA99001 by Envalior is a heat & UV stabilized, cost-effective, polyamide 6 (PA6) grade with low fuel permeation. It is suitable for continuous extrusion blow molding or intermittent processes... view more

Akulon® Fuel Lock FLE40-HP by Envalior is a low fuel permeation polyamide 6 grade. Offers good chemical resistance and is suitable for processing by extrusion blow molding. Akulon® Fuel Lock FLE40-HP is used in automotive engine &... view more

Akulon® K240-HP by Envalior is a heat-stabilized, impact-modified polyamide 6 grade. It is suitable for processing by extrusion blow molding. Offers good chemical resistance. Akulon® K240-HP is used in... view more

Akulon® K240-HPG3 by Envalior is a heat-stabilized polyamide 6 grade reinforced with 15% glass. Used in automotive engine applications like clean-, cold- and hot-charged air inlet ducts. Offers good... view more

Akulon® K240-HPG3/A by Envalior is a heat-stabilized polyamide 6 (nylon 6) resin reinforced with 15% glass fiber. Offers good chemical resistance. Akulon® K240-HPG3/A is suitable for processing by extrusion blow... view more

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness... view more

ULTEM™ resin 1000E by SABIC is an unreinforced, amorphous, halogen-free flame retardant polyetherimide (PEI) resin. It is suitable for processing by additive manufacturing, extrusion blow molding... view more

ULTEM™ resin 1000EF by SABIC is an unreinforced, amorphous, flame retardant polyetherimide (PEI) resin. It is suitable for processing by additive manufacturing, extrusion blow molding-, foam-, film... view more

ULTEM™ resin 1000F by SABIC is an unreinforced, flame retardant, amorphous polyetherimide (PEI) resin. It exhibits internal mold release, good chemical-, radiation (gamma, x-ray), UV-C-, and high... view more

ULTEM™ resin 1000R by SABIC is an unreinforced amorphous, flame retardant, metallizable polyetherimide (PEI) resin. It exhibits internal mold release, good dimensional stability, high electric... view more