Makrolon® WB1239 by Covestro is a high viscosity, branched polycarbonate (PC) grade. It is processed by injection stretch blow molding and extrusion blow molding. Makrolon® WB1239 is used in food contact... view more

ULTEM™ resin 1000EF by SABIC is an unreinforced, amorphous, flame retardant polyetherimide (PEI) resin. It is suitable for processing by additive manufacturing, extrusion blow molding-, foam-, film... view more

ULTEM™ resin HU1010 by SABIC is an unreinforced, amorphous, high stiffness polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C and improved flow. It offers... view more

ULTEM™ resin MD130 (Americas) by SABIC is an unreinforced, transparent, standard flow polyetherimide (PEI) resin. Shows good mechanical properties in a broad temperature range. Offers high heat... view more

ULTEM™ resin MD130 (Asia) by SABIC is a standard-flow, unreinforced, transparent polyetherimide (PEI) resin. Shows good mechanical properties in a broad temperature range. Offers high heat... view more

ULTEM™ resin MD130 (Europe) by SABIC is a standard-flow, unreinforced, transparent polyetherimide (PEI) resin. Offers high heat resistance and high glass transition temperature (Tg) up to 217°C... view more

STYRON A-TECH® 1115 is a high impact polystyrene (HIPS) grade. Provides better color consistency, the ability to down-gauge and improved wall thickness distribution. Offers excellent dimensional... view more

STYRON A-TECH® 1170 is a high impact polystyrene (HIPS) grade. Provides better color consistency, the ability to down-gauge and improved wall thickness distribution. Offers gloss, stiffness, flow... view more

STYRON A-TECH® 1290 by AmSty is a high impact polystyrene (HIPS) grade. Offers gloss, stiffness, flow, processing ability, cost and exhibits good impact and ESCR resistance. Provides better color... view more

STYRON® 484 by AmSty is a high impact polystyrene (HIPS) grade. Offers toughness, excellent dimensional stability, gloss, good stiffness, flow, cost, processing ability and exhibits heat resistance... view more

STYRON® 649D is a crystal polystyrene (PS) grade. Offers excellent moldability, excellent clarity, toughness, good gloss in coextrusion, stiffness, flow and cost. Provides better color consistency... view more

Rilsan® BESVO A FDA by Arkema is a food contact approved, lubricated polyamide 11 (PA 11/Nylon 11) resin with renewable resource content. It contains a negligible amount of oligomers. This grade is... view more