Desmopan® CQ33085AUEC DPS300 by Covestro is a thermoplastic polyurethane (TPU) block copolymer grade with special UV stabilizers. It offers good low-temperature flexibility. It is partially based on renewable raw... view more

Makrolon® 1804 by Covestro is a high viscosity, UV stabilized polycarbonate (PC) grade. It is suitable for processing by solid sheet extrusion. It is optimized for low plate-out. It exhibits easy... view more

Makrolon® 6717 by Covestro is a high viscosity, branched, UV stabilized, flame retardant polycarbonate (PC) grade. It exhibits easy release, high heat resistance, good toughness, good dimensional... view more

Akulon® Fuel Lock FL-LP by Envalior is a high-performance, resilient polyamide 6 (PA 6) grade. It is a UV-stabilized grade and offers low fuel permeation benefits. It can be processed by blow molding. Exhibits... view more

Akulon® Fuel Lock FL40-HPX2 NA99001 by Envalior is a heat & UV stabilized, cost-effective, polyamide 6 (PA6) grade with low fuel permeation. It is suitable for continuous extrusion blow molding or intermittent processes... view more

Novamid® 1017-AH1 (N-X174) by Envalior is heat and UV-stabilized polyamide 6 (Nylon 6). It offers medium viscosity and good chemical resistance. Novamid® 1017-AH1 (N-X174) is suitable for processing by extrusion... view more

FLEX NORYL™ Resin WCD841U (Asia) by SABIC is a flexible, PFAS-free, low war page, UV-stabilized, thin-walled, non-reinforced, non-halogenated, flame retarded, extrudable blend of polyphenylene ether (PPE) and... view more

FLEX NORYL™ Resin WCD883CU (Asia) by SABIC is a flexible, PFAS-free, unfilled, thin-walled, non-halogenated and flame retarded extrudable blend of polyphenylene ether (PPE) and thermoplastic elastomer (TPE). It... view more

LEXAN™ COPOLYMER CFR7630 (Asia) by SABIC is an unreinforced polycarbonate resin. It offers low smoke & toxicity, mold release and processability. It is a flame retarded, heat- & UV-stabilized... view more

LEXAN™ COPOLYMER CFR9131 (Asia) by SABIC is a flame retarded, heat- & UV-stabilized, non-chlorinated & non-brominated, unreinforced polycarbonate (PC) resin. It offers low smoke & toxicity, mold release, high flow... view more

LEXAN™ COPOLYMER EXL1330 (Asia) by SABIC is a general purpose, unreinforced polycarbonate (PC) siloxane copolymer. It is a heat- & UV-stabilized grade which exhibits mold release along with shorter... view more

Kynar Flex® 2750-01 by Arkema is a polyvinlylidene fluoride (PVDF) copolymer grade. It is a light- , heat- and UV stabilized grade, exhibiting maximum flexibility and impact strength. Offers... view more

Kynar Flex® 2800-00 by Arkema is a pigmentable, light-, heat- & UV-stabilized, polyvinlylidene fluoride (PVDF) copolymer grade. It exhibits low modulus, low melting point as well as good resistance... view more

Kynar Flex® 2800-20 by Arkema is a polyvinlylidene fluoride (PVDF) grade. It is a light- , heat- and UV stabilized grade. Designed for injection molding, profile- , sheet - and film extrusion... view more