Texin® 250DE by Covestro is a transparent, aromatic polyester-based thermoplastic polyurethane (TPU). It is characterized by a low gel content, good clarity, good abrasion resistance, and very good... view more

Texin® 260DE by Covestro is an aromatic polyester-based thermoplastic polyurethane (TPU). It is suitable for processing by extrusion, blow molding and injection molding. It is used in belting... view more

Arnitel® EM550-H by Envalior is heat-stabilized, high performance, thermoplastic copolyester grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing environmental... view more

Arnitel® EM630-H by Envalior is a high-performance, heat stabilized, thermoplastic copolyester (TPC) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing... view more

Stanyl® TE200F6-FC by Envalior is a food contact quality, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, heat- &... view more

Xytron™ G3020DW-FC by Envalior is a food contact quality, flame-retardant polyphenylene sulfide (PPS) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It is a... view more

Xytron™ G4020DW-FC by Envalior is a food contact quality, flame-retardant polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It is a... view more

Supreme 112 by Master Bond is an exceptionally low viscosity epoxy (EP) system for bonding, sealing, potting, encapsulation and impregnation. It requires elevated temperature curing. It offers... view more

WANAMID® L3000 by Wanhua Chemical is a high viscosity polyamide 12 (PA 12) with good barrier properties, extremely low density and water absorption rates. It provides excellent self-lubricating properties... view more

3M™ Dyneon™ Fluoroelastomer FC 2181Z by 3M-Dyneon is a medium viscosity fluoroelastomer. It is a bisphenol cured grade containing 65.9% fluorine content. It is a di-polymer of vinylidene fluoride... view more

3M™ Dyneon™ Fluoroelastomer FPO 3730 by 3M-Dyneon is a peroxide curable, raw gum fluoroelastomer containing 69.8% fluorine. It is a terpolymer of hexafluoropropylene, vinylidene fluoride and... view more

3M™ Dyneon™ Fluoroplastic E-15188H is a melt processable fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. Is suitable for processing by extrusion and... view more

3M™ Dyneon™ Fluoroplastic PVDF 60100000 is a polyvinlylidene fluoride (PVDF) grade. Is suitable for processing by extrusion and compression molding. Exhibits good color stability, good permeation... view more

3M™ Dyneon™ Fluoroplastic PVDF 60120000 is a high molecular weight polyvinlylidene fluoride (PVDF) homopolymer grade by 3M-Dyneon. Suitable for processing by extrusion and compression molding... view more

AFLAS® 300S by AGC is a peroxide cure type fluoropolymer grade. It shows superior amine resistance & electrical insulation, outstanding heat-resistance, extremely low aromatizing properties and... view more

Fluon® ETFE AH-700 by AGC is a non-conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, lower melting properties, good processability... view more

Fluon® ETFE AH-700C by AGC is a conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, protection against static build-up, lower melting... view more

Fluon® ETFE AH-800 by AGC is a non-conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, lower melting properties, good processability... view more

Fluon® ETFE AH-800C by AGC is a conductive ethylene tetrafluoroethylene (ETFE) grade. Offers good chemical resistance, permeation resistance, protection against static build-up, lower melting... view more