101-CA06 is a nucleated & antistatic polypropylene (PP) homopolymer grade. Exhibits improved transparency, high stiffness, good balance between easy flow & mechanical properties, very good optical... view more

B53-35H-100 is a high density polyethylene copolymer present as white to yellow colored pellets/ flakes. Insoluble in cold water, hot water and octanol. It can be processed using injection (blow)... view more

EVICOM™ GRS 5206 by Ineos is a general purpose, rigid polyvinyl chloride (PVC) grade available in the form of pellets. It is suitable for blow molding, industrial and non-specific food applications... view more

EVICOM™ RC7/025 by Ineos is a clear/transparent, rigid polyvinyl chloride (PVC) grade available in the form of pellets. It exhibits good impact resistance and is food contact acceptable. EVICOM™... view more

Eltex® A4009MFN1325 is a high density polyethylene (HDPE) homopolymer with a narrow molecular weight distribution. Exhibits very low gel content, excellent processability & surface quality and very... view more

Eltex® MED 200-MG02 by Ineos is a polypropylene (PP) random copolymer grade. Exhibits steam sterilizability at 121°C, good optical properties and easy processing. Can be processed using injection... view more

Eltex® MED PH22D630 is an additive-free, easily processable low density polyethylene (LDPE) grade. Can be processed using blow molding, injection molding, film blowing and extrusion. Designed for... view more

Eltex® MED PH23H630 is an additive-free, easily processable low density polyethylene (LDPE) grade. Can be processed using blow molding, injection molding, and extrusion. Designed for blow molding of... view more

Eltex® MED PH27D630 is an additive-free, easily processable low density polyethylene (LDPE) grade. Can be processed using blow molding, injection molding, film blowing and extrusion. Designed for... view more

Eltex® MED PH30D630 by Ineos is an additive-free, easily processable low density polyethylene (LDPE) grade. It can be processed using blow molding, injection molding, film blowing and extrusion. It... view more

G50-100 is a high molecular weight, high density polyethylene copolymer present as white to yellow colored pellets/ flakes. Insoluble in cold water, hot water and octanol. It can be processed using... view more

H02C-00 is a low flow rate, high clarity, nucleated polypropylene homopolymer. It is insoluble in cold water, hot water and octanol. It can be processed using injection molding. Suitable for... view more

H02C-01 is a low flow rate, clarified polypropylene homopolymer. It is insoluble in cold water, hot water and octanol. It can be processed using injection molding. Suitable for extrusion... view more

H02C-04 is a low flow rate, high clarity, nucleated polypropylene homopolymer. It is insoluble in cold water, hot water and octanol. It can be processed using injection molding. Suitable for... view more

HP50-25-153 is a high performance, high density polyethylene copolymer present as white to yellow colored pellets/ flakes. Insoluble in cold water, hot water and octanol. It can be processed using... view more

HP53-25-155 by Ineos is a high performance, high density polyethylene copolymer. It can be processed using compression molding and blow molding applications requiring excellent environmental... view more

HP55-25-155 is a high performance, high density polyethylene copolymer present as white to yellow colored pellets/ flakes. Insoluble in cold water, hot water and octanol. It can be processed using... view more

R01A-00 is a low flow rate, antistatic polypropylene random copolymer grade. Exhibits good see-through & contact clarity and good impact resistance at both room & refrigerator temperatures... view more

R01C-00 is a low flow rate, high clarity, low plate-out, antistatic polypropylene random copolymer grade. Exhibits excellent see-through clarity, high room & refrigerator-temperature impact... view more

R08S-00 is a polypropylene random copolymer grade. It exhibits superior slip properties and consistent processing. Insoluble in cold water, hot water and octanol. Suitable for film, blow molding... view more