NORYL™ Resin FP3060 by SABIC is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-halogenated &... view more

NORYL™ Resin PX1860 (Europe) by SABIC is an opaque, unfilled, heat stabilized, injection moldable modified polyphenylene ether and polystyrene resin. It is designed for good dimensional stability... view more

NORYL™ Resin RN0612 by SABIC is an unfilled & injection moldable modified polyphenylene ether and high impact polystyrene (HIPS) resin. It comprises at least 30% post-consumer recycle (PCR) styrenic... view more

FLEX NORYL™ Resin WCP841 (Europe) by SABIC is a heat stabilized, impact modified, halogen free flame retardant polyphenylene ether (PPE) and thermoplastic elastomer (TPE) blend. It exhibits mold... view more

FLEX NORYL™ Resin WCP921A (Europe) by SABIC is a heat stabilized, impact modified, non-halogenated, flame retarded, injection moldable blend of polyphenylene ether (PPE), styrene-ethylene butylene... view more

NORYL™ Resin RN0401 by SABIC is a non-brominated, non-chlorinated and halogen-free, flame retardant polyphenylene ether blend (PPE). Is suitable for processing by injection molding. Allows 14% to 19%... view more

SABIC® LDPE 2308N0 by SABIC is an additive-free, low density polyethylene (LDPE) grade produced using SABIC Clean Tubular Reactor (CTR) Technology. It exhibits high purity, high toughness, good... view more

SABIC® LDPE 2308TN00 by SABIC is a low density polyethylene (LDPE) grade. Exhibits chemical resistance and environmental stress-cracking resistance (ESCR). SABIC® LDPE 2308TN00 is suitable for... view more

SABIC® LDPE HP7022 by SABIC is a low-density Polyethylene (LDPE) grade. It does not contain slip and anti-block agents. Shows consistent processability, flexibility, recyclability and toughness... view more

SABIC® LDPE PCG07 by SABIC is a low density polyethylene (LDPE) grade. Is suitable for processing by injection molding and film extrusion. Recommended for medical and packaging applications. SABIC® LDPE PCG07... view more

SABIC® LDPE PCG09 by SABIC is an additive-free, low-density polyethylene (LDPE) grade. Exhibits high purity. Suitable for processing by cast film extrusion and injection molding. Recommended fo... view more

SABIC® LDPE PCG22 by SABIC is an additive free low density polyethylene (LDPE) grade. Exhibits high purity and high MFR for good flow properties. Is suitable for processing by injection molding... view more

SABIC® LLDPE MG200024 by SABIC is a high flow, linear low density polyethylene copolymer grade with a narrow molecular weight distribution. It is typically used for masterbatches with very high... view more

SABIC® PP PPA20 by SABIC is a high gloss polypropylene (PP) impact copolymer (ICP) grade. It offers aesthetically appealing surface with potentially significant cost and energy savings, due to its... view more

SABIC® PPcompound 9110 by SABIC is an impact modified polypropylene (PP) grade reinforced with 10% talc/mineral. It exhibits excellent impact and stiffness ratio. It offers high flow, high scratch... view more