Makrolon® 3106 by Covestro is a high viscosity polycarbonate (PC) grade. Exhibits easy release, high heat resistance, good toughness, good dimensional stability, high creep modulus and good electrical... view more

Makrolon® 3206 by Covestro is a high viscosity, food contact quality polycarbonate (PC) grade. It is suitable for processing by injection molding and extrusion. Complies with UL 94 HB & V-2 flame... view more

DOMAMID® 6AFFC is an unreinforced polyamide 6 (PA 6) grade. Exhibits high fluidity, high mechanical strength & stiffness, rigidity, thermal stability, good impact resistance even at low temperature... view more

DOMAMID® 6B30FC is a polyamide 6 (PA 6) grade reinforced with 30 % glass bead. Exhibits high mechanical strength & stiffness, rigidity, thermal stability, good impact resistance even at low... view more

DOMAMID® 6FC is an unreinforced, general purpose polyamide 6 (PA 6) grade. Exhibits high mechanical strength & stiffness, rigidity, thermal stability, good impact resistance even at low temperature... view more

DOMAMID® 6G15FC is a polyamide 6 (PA 6) grade reinforced with 15 % glass fiber. Exhibits high mechanical strength & stiffness, rigidity, thermal stability, good impact resistance even at low... view more

DOMAMID® 6G20FC is a polyamide 6 (PA 6) grade reinforced with 20 % glass fiber. Exhibits high mechanical strength & stiffness, rigidity, thermal stability, good impact resistance even at low... view more

Grilamid® LBV-50H FWA Black 9225 is a heat stabilized polyamide 12 (PA-12) grade reinforced with 50% glass fiber. It exhibits high toughness, high stiffness, high elongation and low water... view more

Grilamid® XE 4074 Black 9225 is a heat stabilized polyamide 12 (PA-12) grade reinforced with 50% glass beads. It exhibits high dimensional stability, very low water absorption, low shrinkage and... view more

VESTAMID® X7099 by Evonik is a food contact acceptable, polyamide 6-12 (PA 6-12) based specialty grade reinforced with 20% glass fiber and carbon black. Exhibits resistance to fuel-, good abrasion... view more

Bio-Flex® F 6510 by FKuR is a biodegradable polymer-blend based on polylactic acid (PLA). It contains a copolyester and additives. It is derived from natural resource material but does not contain... view more

Bio-Flex® S 5630 by FKuR is a biodegradable polymer-blend based on polylactic acid (PLA) containing a copolyester and additives. It can be easily colored with masterbatches based on PLA. It is... view more

Bio-Flex® S 6540 by FKuR is a biodegradable polymer-blend based on polylactic acid (PLA) used for injection molding. It contains a copolyester and additives. It is derived from natural resource... view more

Biodegradable polymer-blend based on cellulose acetate (CA), special additives and a high percentage of fillers. It is derived from partially natural resource material but does not contain any... view more

Biodegradable polymer-blend based on cellulose acetate (CA) contains additives. It is derived from partially natural resource material but does not contain any starch or starch derivatives... view more

THERMOLAST® K TF5PEN is a natural colored (easy to color), water-insoluble, halogen-free, recyclable TPE (thermoplastic elastomer) grade present as firm elastic granules. Exhibits pleasant surface... view more