ATLAC® 430 by AOC is a non-reinforced, multi-purpose epoxy bisphenol-A vinyl ester resin for corrosive environments, dissolved in styrene. It can be cured with 1 ml Butanox LPT-IN (AKZO-Nobel) and... view more

ATLAC® 5200 FC by AOC is a non-reinforced epoxy bisphenol-A vinyl ester, dissolved in styrene. Exhibits tack-free cure and high elongation. It can be cured with 1 ml Butanox LPT-IN (AKZO-Nobel) and... view more

ATLAC® 580 by AOC is an urethane-based, bisphenol-A vinyl ester resin. It can be cured using the cure system including 0.5% NL63-10P, 0.5% NL51P and 1.5% Butanox M-50. Possesses good flexibility... view more

ATLAC® 580 ACT by AOC is a pre-accelerated, thixotropic, urethane-based, bisphenol-A vinyl ester resin. It can be cured using the cure system including Atlac 580, 0.5% NL63-10P, 0.5% NL51P and 1.5%... view more

ATLAC® 590 by AOC is a non-reinforced, epoxy novolac-based vinyl ester resin for demanding corrosive environments, dissolved in styrene. It can be cured with 0.3% NL51P and 1% Butanox M-50. It... view more

RPU 70 by Carbon is a versatile rigid polyurethane thermoplastic grade. It exhibits excellent toughness & stiffness, good heat resistance, good strength. It possesses excellent tensile... view more

SILASTIC™ MS-0002 Moldable Silicone by Dow is a high viscosity, two-part, 1:1 ratio, fast-curing translucent liquid silicone rubber. It possesses good mechanical properties, long pot-life and better heat resistance... view more

BLUESIL™ TCS 7516 A/B by Elkem Silicones is a low viscosity, two-component heat curing liquid silicone elastomer, which cures by a polyaddition reaction. It exhibits a fast cure at elevated... view more

BLUESIL™ TCS 7600 CATA by Elkem Silicone is part of a two-component polyaddition heat-cured screen printable silicone elastomer system. It functions as the cure catalyst for the TCS screen printing... view more

BLUESIL™ TCS 7612 Base by Elkem Silicones is a part of a two-component polyaddition heat-cured, low-viscosity screen printable silicone elastomer. It is well suited for blending with BLUESIL™ TCS... view more

BLUESIL™ TCS 7664 Base by Elkem Silicones is a part of a two-component polyaddition heat-cured screen printable silicone elastomer with excellent elongation and physical properties. It is well... view more

BLUESIL™ TCS 7671 WHT by Elkem Silicones is a two-component, polyaddition heat cured liquid silicone elastomer system. It is an environmental friendly (PVC free), heat resistant grade based on... view more

Araldite® EPN 1138 A-85 by Huntsman is epoxy phenol novolac resin. It is a solution of Araldite® EPN 1138 supplied at 85% non-volatiles in acetone. Shows good heat- and chemical resistance. Possible... view more

Araldite® EPN 1180 A-85 by Huntsman is epoxy phenol novolac resin. Shows heat- and chemical resistance. It is a solution of Araldite® EPN 1180 supplied at 85% non-volatiles in acetone. Possible... view more

Araldite® MY 0600 by Huntsman is a trifunctional glycidyl amine type epoxy resin, based on meta-amino phenol. Offers high temperature performance and chemical resistance. It provides strong... view more

Araldite® MY 720 by Huntsman is a tetra-functional glycidyl amine type epoxy resin, based on methylene dianiline. Offers high temperature-, radiation- and chemical resistance. It provides strong... view more

Araldite® MY 9512 by Huntsman is a tetra-functional glycidyl amine type epoxy resin, based on methylene dianiline. Offers high temperature- and chemical resistance. It provides strong improvement of... view more