BLUESIL™ TCS 7513 A/B by Elkem Silicones is a two-component heat curing liquid silicone elastomer that cures by a polyaddition reaction. It is used to impregnate on various substrates such as... view more

BLUESIL™ TCS 7516 A/B by Elkem Silicones is a low viscosity, two-component heat curing liquid silicone elastomer, which cures by a polyaddition reaction. It exhibits a fast cure at elevated... view more

BLUESIL™ TCS 7534 A/B by Elkem Silicones is a two-component heat curing liquid silicone elastomer that cures by a polyaddition reaction. It offers excellent adhesion to woven and non-woven... view more

BLUESIL™ TCS 7537 A/B by Elkem Silicones is a two-component heat curing liquid silicone elastomer that cures by a polyaddition reaction. It shows excellent adhesion even on difficult substrates. It... view more

Silopren™ LSR 2030 by Momentive Performance Materials is a low viscosity, two-component liquid silicone rubber (LSR). It is a non-combustible, biocompatible resin available in a mixing ratio of 1:1... view more

CYCOM® 823 RTM by Syensqo is a one-part, liquid epoxy resin. Possesses high elongation, low viscosity and high toughness. It can be fully cured after 1 hour at 125°C. It has an out-life of 1 week at... view more

CYCOM® 890 RTM by Syensqo is a low-viscosity, one-part liquid epoxy resin with low reactivity. It has an out-life of 1 month at room temperature. Compatible with binder system, CYCOM® 7720 &... view more

CYCOM® 977-20 RTM by Syensqo is a low-viscosity, toughened, one-part, liquid epoxy prepreg resin. Provides excellent impact resistance and ensures full fiber wetting. Suitable for processing by injection... view more

Fomblin® LC200 by Syensqo is a cost-effective perfluoropolyether (PFPE) grade. Exhibits low viscosity, excellent wear characteristics and very good temperature properties. Offers high density, high... view more

ELASTOSIL® A07 by Wacker is a free-flowing, ready-to-use, one-component system, solvent-based room-temperature vulcanization silicone dispersion. It exhibits low viscosity, low modulus and excellent... view more

ELASTOSIL® RT 601 A/B by Wacker is a pourable, addition-curing, two-component, room-temperature vulcanizing silicone rubber. It consists of two parts part A and part B (9:1). Exhibits low viscosity... view more

ELASTOSIL® RT 602 A/B by Wacker is a two-component, pourable, addition-curing, room-temperature vulcanizing silicone rubber. It consists of two parts: part A and part B (9:1). Exhibits low... view more

ELASTOSIL® RT 604 A/B by Wacker is a pourable, room-temperature vulcanizing silicone rubber. Exhibits very low viscosity, high clarity, rapid heat cure and low hardness. It is a two-component and... view more

ELASTOSIL® RT 607 A/B by Wacker is a flame retardant, two-component, pourable, addition-curing, room-temperature vulcanizing silicone rubber. Exhibits low viscosity, rapid heat cure, high hardness... view more

EPON™ Resin 1001-K-65 by Westlake Epoxy is a VOC-free, non-HAPs, low viscosity, 65% solids solution of EPON™ Resin 1001F-type epoxy resin derived from bisphenol-A and epichlorohydrin. It is diluted... view more

EPON™ Resin 235 by Westlake Epoxy is a blend of BPA and BPF liquid epoxy resin. It offers improved crystallization resistance and low viscosity. It is suitable for civil engineering (thin films &... view more

EPON™ Resin 813 by Westlake Epoxy is a low viscosity liquid bisphenol-A based epoxy resin diluted with cresyl glycidyl ether. It reacts with full range of curing agents at low temperatures. This... view more

EPON™ Resin 8131 by Westlake Epoxy is a flexibilized, 100% reactive, low viscosity epoxy resin for use in various concrete patching/resurfacing, and reinforced plastics. The shelf life of this... view more

EPON™ Resin 8132 by Westlake Epoxy is a 100% reactive, bisphenol-A based epoxy resin diluted with alkyl glycidyl ether. This resin is specially designed for applications requiring low viscosity... view more