ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness... view more

ULTEM™ resin 1000EF by SABIC is an unreinforced, amorphous, flame retardant polyetherimide (PEI) resin. It is suitable for processing by additive manufacturing, extrusion blow molding-, foam-, film... view more

ULTEM™ resin 1000F by SABIC is an unreinforced, flame retardant, amorphous polyetherimide (PEI) resin. It exhibits internal mold release, good chemical-, radiation (gamma, x-ray), UV-C-, and high... view more

ULTEM™ resin 1000R by SABIC is an unreinforced amorphous, flame retardant, metallizable polyetherimide (PEI) resin. It exhibits internal mold release, good dimensional stability, high electric... view more

ULTEM™ resin 1010AR by SABIC is an unreinforced, general purpose, amorphous, flame retardant, metallizable polyetherimide (PEI) resin. It offers easy flow, internal mold release, good chemical... view more

Zytel® 3D1000PT Pellets by Celanese is polyamide (PA) grade suitable for 3D printing applications. Exhibits good strength, stiffness, good thermal properties, easy printability and low shrinkage. Zytel® 3D1000PT Pellets is... view more

Zytel® 3D12G30PT Pellets by Celanese is a 30% glass fiber reinforced polyamide (PA) grade. Exhibits good surface finish and resistance to common solvent and chemical. Provides outstanding heat resistance and... view more

Zytel® 3D12G50PT Pellets by Celanese is a heat resistant, 50% glass fiber reinforced polyamide (PA) grade. Exhibits good surface finish and resistance to common solvent and chemical. Provides lower moisture... view more

ESTANE® 3D TPU F98A-030CR HC by Lubrizol is a 3D printing, thermoplastic polyurethane (TPU). This grade exhibits excellent mechanical properties, low warpage and shrinkage. ESTANE® 3D TPU F98A-030CR HC possesses high strength, high... view more

Terraloy™ 3D-40040 Series compounds are high impact, high heat polylactic acid (PLA) grades. These compounds have improved heat deflection temperature and impact strength compared with standard PLA... view more